Pages: [1]
Author Topic: Magneti Marelli cluster showing 999999km  (Read 4120 times)
Petar92
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


WWW
« on: May 14, 2022, 08:25:18 AM »

Hello all,
This is my first post sorry if messing up the rules (i have read them).
My car is audi TT 2000 dash is 8N1 920 880 A
I was training to read the SKC of the dash with Vag commander. This was unsuccessful. The problem is that i have mis clicked the odometer change button and now cluster shows 999 999. I have downloaded the bin file.
Can someone help me or lead me on the correct way?
Probably checksums problem?
Logged

Petar92
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


WWW
« Reply #1 on: May 14, 2022, 12:51:34 PM »

sory for the demaged file.
Here is a new one.
Logged

elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204


« Reply #2 on: May 14, 2022, 02:42:59 PM »

sory for the demaged file.
Here is a new one.
>>> 6313 <<<
Logged
Petar92
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


WWW
« Reply #3 on: May 14, 2022, 11:40:32 PM »

>>> 6313 <<<
Thank you for the PIN i will try it later today.
If it works i will have plan B, new dash.
Logged

Petar92
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


WWW
« Reply #4 on: May 15, 2022, 04:00:51 AM »

>>> 6313 <<<
Pin works!
Any ideas how  to fix the part with the 999 999km?
Logged

elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204


« Reply #5 on: May 15, 2022, 12:52:50 PM »

Pin works!
Any ideas how  to fix the part with the 999 999km?
your eeprom is read not full size and therefore this error has arisen
Logged
Petar92
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


WWW
« Reply #6 on: May 15, 2022, 09:45:11 PM »

So i need to get the full stuff somehow.
I will try reading it with diferent versions of vag comander.
Any other software that can read the MM cluster?
I have tried eeprom programmer but can't connect to the  cluster. Tried to find a dump on the net but no luck, only in one Russian site, but PayPal dosent work at the moment because war.
Logged

elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204


« Reply #7 on: May 16, 2022, 01:16:42 AM »

So i need to get the full stuff somehow.
I will try reading it with diferent versions of vag comander.
Any other software that can read the MM cluster?
I have tried eeprom programmer but can't connect to the  cluster. Tried to find a dump on the net but no luck, only in one Russian site, but PayPal dosent work at the moment because war.
you are able to read full flash
Logged
Petar92
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


WWW
« Reply #8 on: May 16, 2022, 01:24:22 AM »

I can try again tonight to read it.
Logged

Petar92
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


WWW
« Reply #9 on: May 17, 2022, 03:30:06 AM »

Today i was training to read the full file and dash returned to normal. Don't know how and what happened but it is working normally.
Logged

elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204


« Reply #10 on: May 17, 2022, 06:11:08 AM »

Today i was training to read the full file and dash returned to normal. Don't know how and what happened but it is working normally.
I don't know how you did it but the meter checked the crc and fixed it, that's why it works
Logged
Petar92
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


WWW
« Reply #11 on: May 17, 2022, 01:11:17 PM »

I changed the drivers for the kkl cable, tried the MM direct to download the eeprom. For the first time it didn't crash but didunt read anything, then used the shadow 2 cobdent connect then shadow 3 it read not full again but the cluster repaired itself by some Holly shit way.
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)