Pages: [1]
Author Topic: 2000 A6 2.7T 230hp wanting to flash to stock 2001 A6 2.7T 250hp bin  (Read 7360 times)
gsxeclipsepsi
Full Member
***

Karma: +0/-43
Offline Offline

Posts: 70



I am new to this flashing method. I come from ECUflash with DSM's and this is alittle different. I'm trying to read up but I have a few questions.

1. Will my 2000 A6 2.7T Tip be able to be flashed to the stock 250hp bin listed http://nefariousmotorsports.com/forum/index.php?topic=1740.0title=

Also can someone point me to a Stage 1 tune that will work for me. I'm am still learning. Also how do I check or know if I have immo?

Thanks for help.

I'm attempting to read ecu now and backup I'm sure I have the correct memory layout selected.
Logged
gsxeclipsepsi
Full Member
***

Karma: +0/-43
Offline Offline

Posts: 70


« Reply #1 on: June 05, 2012, 05:33:35 PM »

4B0907551L 2.7L V6/5VT G
0261206562

WHAT I READ FROM ECU
Logged
gsxeclipsepsi
Full Member
***

Karma: +0/-43
Offline Offline

Posts: 70


« Reply #2 on: June 05, 2012, 05:41:06 PM »

1037352739

IT ALL MATCHES
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #3 on: June 06, 2012, 02:31:59 AM »

You'll have immo in your EEPROM. You have to wodnload it via boot mode and command line tool that is posted in this forum, then hex edit it and flash back before attempting to flash this file
Logged

A6turbofrance
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 119


« Reply #4 on: June 06, 2012, 06:34:06 AM »

i have A6 2000 2.7T
i just flash stage 2++ tune for S4 without any problem.
Logged
A6turbofrance
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 119


« Reply #5 on: June 06, 2012, 06:34:43 AM »

with galleto 1260
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #6 on: June 06, 2012, 06:36:29 AM »

If flash file is completely same as old one (except for modified map) then you're good to go, but if you try to convert to different SW version then you have to edit EEPROM
Logged

SeRiLLo
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 79


« Reply #7 on: July 27, 2012, 02:31:20 AM »

....then you have to edit EEPROM
For what? How do you think the immobilizer code in the eeprom affects the program inside of flash chip? I flashed TT file for A6, and M-box file for A6 and allroad, other A6 chip for allroad and immo OK. Key code reads by instrument cluster(or immo box for a4) and ecu just compare immo code with key code from i-cluster and decides to run or not.
But I'm not sure that 250file(2001) will run at 230(2000), but for other reasons, not because of IMMO. First compare MLOFS -make sure that the MAF the same. Then read your stock chip and try flash 250file in boot mode. And run a car. If not running then flash back stok. And be sure that new file supports the automatic box ECU coding. it`s all
« Last Edit: July 27, 2012, 02:44:05 AM by SeRiLLo » Logged
A6turbofrance
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 119


« Reply #8 on: July 27, 2012, 01:04:50 PM »

i have flash an S4 stage 2++ file on my a6 euro 2.7T so i thinks it will work ...
just save ur old file before doing it and see if work
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)