Howdy folks, first post.  I'm converting from a mk4 2.0L to 24v VR6.  Im having an issue with the ECU not turning the engine off once the car has started.  I've repined the ME 7.5 Main power relay turn on to the 7.1.1 pin 23-21. And externally tapped and fused into a switched power for the ECU turn on pin 25.  From cold and dark the ignition turns on power but when I pull the key out the cluster flickers, and throttle body ticks.  Is there another power that would keeps the engine alive even after the ignition signal is cut? Thanks very much.