Pages: [1]
Author Topic: Lpfp audi s3 med 9.1  (Read 1586 times)
benblckm
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: June 16, 2022, 07:37:53 PM »

Hello,

Sorry for my English I'm French I use Google translate...

I have an audi s3, in stage 1 Flexfuel

I recently changed my low pressure pump to one from ttrs
Except that I have cuts when at more than 200km/h

I saw that the map needs to be updated, I have a kess v2
From what I understood, you have to touch the KFNTBKS and KFFLAF map?

If so, what do I have to change concretely so as not to do anything stupid and burn everyone out...

thank you
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503


« Reply #1 on: June 16, 2022, 11:28:39 PM »

Flex fuel MED9?
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-112
Offline Offline

Posts: 1064


« Reply #2 on: June 17, 2022, 01:27:30 AM »

LOL
Logged

I have no logs because I have a boost gauge (makes things easier)
benblckm
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #3 on: June 17, 2022, 03:10:45 AM »

Flex fuel MED9?

Yes for 3 years, no problem, no lights, afr correct
Logged
benblckm
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #4 on: June 17, 2022, 03:11:28 AM »

LOL

 ??
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-112
Offline Offline

Posts: 1064


« Reply #5 on: June 17, 2022, 04:59:53 AM »

Do you have an ethanol content sensor connected to the ECU?
Logged

I have no logs because I have a boost gauge (makes things easier)
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #6 on: June 17, 2022, 06:08:20 AM »

Add 25% to all the map, start to finish.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)