AUQ with BAM MAF and Injectors (Rescaled = bad fueling)

Pages: [1]

« previous next »

Author

Topic: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) (Read 1780 times)

Fabioo

Full Member

Karma: +0/-2
Offline

Offline

Posts: 51

	AUQ with BAM MAF and Injectors (Rescaled = bad fueling) « on: June 28, 2022, 12:10:16 PM »

Hello, trying to adapt MAF and Injectors from BAM engine into AUQ (06A906032HN).
Copied maps MLHFM/KFKHFM/FKKVS/TVUB from Audi S3 8N0906018BH 362999.
FPR is 3bar i can see on it.

Not sure about KRKTE because when i put value from S3 (0,08358) Lambda goes rich like -20%.


	Logged

denniss112

Full Member

Karma: +7/-1
Offline

Offline

Posts: 114

Audi TT 99' | 180+HP FWD

	Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) « Reply #1 on: June 28, 2022, 03:16:15 PM »

Logs or it didnt happen.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1601

	Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) « Reply #2 on: June 28, 2022, 11:16:38 PM »

missing krkte Huh


	Logged

Fabioo

Full Member

Karma: +0/-2
Offline

Offline

Posts: 51

	Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) « Reply #3 on: June 30, 2022, 07:03:35 AM »

Ok so maps i copied correctly, i also did copy KRKTE from S3 but it was overfueling alot. I am going to do another tests today, should i clear adaptations ot anything after i changed MAF & Injectors ?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) « Reply #4 on: June 30, 2022, 11:22:54 AM »

MLOFS? logs.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

tao13

Sr. Member

Karma: +17/-47
Offline

Offline

Posts: 471

	Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) « Reply #5 on: June 30, 2022, 11:04:41 PM »

Fkkvs has other axis in AUQ, but is not so important and i think is not a cause for your -20% adaption.
See KFLF too.


	Logged

Fabioo

Full Member

Karma: +0/-2
Offline

Offline

Posts: 51

	Re: AUQ with BAM MAF and Injectors (Rescaled = bad fueling) « Reply #6 on: July 01, 2022, 04:05:01 AM »

Yesterday re-checked whole setup and found out that MAF housing is from r32 ... no idea about Maf socket, aftermarket MAFs... I think i will adapt stock maf to bigger housing, there was app for that, already used it


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 11:44:29 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search