Pages: 1 [2]
Author Topic: Write Read Eeprom Mirror  (Read 5994 times)
benni4000
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 24


« Reply #15 on: August 26, 2022, 12:10:09 PM »

I've tried same Code on car.
It seems to be saved.
I have to Check if it just saving when engine was turned on once.

I will report when i've tested enought.

But could it be possible that eeprom just gets saved when engine was started?

Gesendet von meinem SM-G990B mit Tapatalk

Logged
benni4000
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 24


« Reply #16 on: August 26, 2022, 12:11:03 PM »

If you turn off Kl 30 and ignition at once then there will never be afterrun and mirror won't be saved.
No i justed turned off igntion. Kl. 30 was connected everytime.

Gesendet von meinem SM-G990B mit Tapatalk

Logged
benni4000
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 24


« Reply #17 on: September 04, 2022, 08:50:26 AM »

Hi Guys,

now i finally can say that the ONLY problem was that the ECU was on bench.
Now i've tested it on Car and it saving everytime i change map.
Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1455


mk4 1.8T AUM


« Reply #18 on: September 04, 2022, 10:07:13 AM »

A small offtop here
Why do you even need to save selected map in eep?
Logged
benni4000
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 24


« Reply #19 on: September 08, 2022, 03:37:33 PM »

Cause i want to start with the last used map Wink nothing else

Gesendet von meinem SM-G990B mit Tapatalk

Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1455


mk4 1.8T AUM


« Reply #20 on: September 08, 2022, 07:42:58 PM »

Ecu ram powered all the time so you dont need to store something in eep until battery disconnected
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 15 queries. (Pretty URLs adds 0s, 0q)