Pages: [1]
Author Topic: car feels like its in limp first drive but next drive is boosting normally  (Read 5758 times)
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741



Hi guys

my wifes car has been down while I have been doing the brakes so she has been driving the a4 1.8t its been running my tune for quite a while now, the tune is fairly aggressive... anyway I jumped into the car the other day too take it for a panel beater quote after the wifes recent shopping trip where someone clipped the left side in the parking bay, now for the weird part started the car drove out the drive and the car felt a bit flat first thing that came to mind was boost leak so drove to the panel shop stopped got the car assessed on the drive home the car was back up and running and boosting fine! took it for another drive this morning (2nd quote) but first checked for faults, no faults so decided too log it and hey same issue just not boosting stopped at the panel shop, and on the drive home same thing back up and running and boosting fine, logs attached if anyone has any ideas?

As I side note I know the requested boost is fairly high its like that so I could adjust the requested too suite the max the turbo can give and since I have been driving the v8 I havent really spent more time on the tune  Wink

 
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW

You are requesting too much boost too soon.

http://s4wiki.com/wiki/Tuning#Positive_deviation

Why are you requesting 22psi at 2000rpm?

Can your turbos make 22psi at 2000rpm?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741



You are requesting too much boost too soon.

http://s4wiki.com/wiki/Tuning#Positive_deviation

Why are you requesting 22psi at 2000rpm?

Can your turbos make 22psi at 2000rpm?

Yup I know the turbo cant do 22psi at 2000rpm the idea was too max it out so I can see what the turbo CAN deliver and then adjust accordingly, regarding the positive deviation its not logging that as a fault and if you look at the logs the throttleplate position is at 100% when going WOT anyway so its not a softlimp condition.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW

Your requested boost says otherwise.

Positive deviation won't always throw a code or close throttle, it will sometimes simply reduce requested boost.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741



ok when I am looking at the feels_like_limp log, the requested was always lower than actual the other log which felt like the car normally is yes agreed requested was higher BUT that run the car was 100% fine it was the other run where the issue was and it was like that since first start on the day, whats weird now is that after I have been driving the car again for the last 2 days its been fine, its almost like it needed to be driven a little harder than my wife was driving it.
Logged
janne
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 50



some 1.8t ecus including bug.
It is in limp mode when you start it and next start all is ok.
Put leakdetection start value about 2000rpm.
In bug sw it try to diagnose boost leak in 200 rpm.
Regards
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741



some 1.8t ecus including bug.
It is in limp mode when you start it and next start all is ok.
Put leakdetection start value about 2000rpm.
In bug sw it try to diagnose boost leak in 200 rpm.
Regards

thanks will try that, I still need to code out my sai, n279 etc as well
Logged
AndiS4
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 117




Shouldnt it be possible to keep everything as it is and change kfdluls in your case? KFVPDKLD Could also be an option.




Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)