XDF for 2000 TT 1.8t without VVT

Pages: [1]

« previous next »

Author

Topic: XDF for 2000 TT 1.8t without VVT (Read 2813 times)

adrianmk2

Newbie

Karma: +1/-1
Offline

Offline

Posts: 11

	XDF for 2000 TT 1.8t without VVT « on: November 05, 2022, 11:40:22 AM »

i got a 2000 TT i need the XDF file.
i checked other files floating around on here but they dont work.
some maps load up right others dont.

the maps that dont work are the main fueling maps. LAMDA maps and controling full load lamda and controling when it kicks in.

here is my stock ecu bin.
if somone could get me a good XDF file for this 2000 1.8T with no VVT and k03s model. 180hp manual transmission.


	Logged

TeknoFi

Full Member

Karma: +1/-3
Offline

Offline

Posts: 85

	Re: XDF for 2000 TT 1.8t without VVT « Reply #1 on: November 05, 2022, 12:10:38 PM »

Try this. Not perfect but gets you somewhere.

You aware that your car doesn't use lamfa much for anything, but uses low tabgtbs + kflbts map..


	Logged

adrianmk2

Newbie

Karma: +1/-1
Offline

Offline

Posts: 11

	Re: XDF for 2000 TT 1.8t without VVT « Reply #2 on: November 05, 2022, 01:10:54 PM »

Quote from: TeknoFi on November 05, 2022, 12:10:38 PM

Try this. Not perfect but gets you somewhere.

You aware that your car doesn't use lamfa much for anything, but uses low tabgtbs + kflbts map..

ok i didnt know i just wanted to make sure i have the right maps to ajust and command afr.


	Logged

adrianmk2

Newbie

Karma: +1/-1
Offline

Offline

Posts: 11

	Re: XDF for 2000 TT 1.8t without VVT « Reply #3 on: November 05, 2022, 02:21:09 PM »

those maps worked..
I was able to take what i needed and made a new xdf file with everything i needed to do a stage 1 and stage 2 tune..

thanks again


	Logged

Sir

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Re: XDF for 2000 TT 1.8t without VVT « Reply #4 on: December 10, 2022, 01:10:05 AM »

I believe I have the same year and model as you would you mind helping another newbie out?

did you have any trouble logging with your ecu file? mine only found wrote 4 parameters...
plsol_w boost pressure desired
nmotll engine idling speed
nmot engine speed
nmot_w Engine speed
Kind of confused, hoping my ecu isn't just bad...


	Logged

Sir

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Re: XDF for 2000 TT 1.8t without VVT « Reply #5 on: December 10, 2022, 01:11:43 AM »

Quote from: adrianmk2 on November 05, 2022, 02:21:09 PM

those maps worked..
I was able to take what i needed and made a new xdf file with everything i needed to do a stage 1 and stage 2 tune..

thanks again

I really would like to take a look at these^ if you dont mind sharing


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 29, 2024, 07:19:22 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search