Pages: [1]
Author Topic: Volvo 2006 xc90 2.5T P0602  (Read 1036 times)
iras24
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« on: November 30, 2022, 11:02:40 AM »

Hello .I have a problem with P0602 after uploading a new file (tuned) to ME7.0 Volvo XC90 2.5T 2006. The engine starts, but after driving a few kilometers the ECU generates the P602 error. At first I thought it was the checksums fault. I'm thinking of excluding this error from the error table but I can't find it. If anyone can help I would be very grateful. Perhaps there is a better solution than removing the error from the table. Regards.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #1 on: November 30, 2022, 12:56:07 PM »

Post file, checksum output.  P602 is not a code.
Logged
iras24
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #2 on: November 30, 2022, 02:43:28 PM »

Hello .I have a problem with P0602 after uploading a new file (tuned) to ME7.0 Volvo XC90 2.5T 2006. The engine starts, but after driving a few kilometers the ECU generates the P0602 error. At first I thought it was the checksums fault. I'm thinking of excluding this error from the error table but I can't find it. If anyone can help I would be very grateful. Perhaps there is a better solution than removing the error from the table. Regards.
Logged
iras24
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #3 on: November 30, 2022, 02:45:50 PM »

Post file, checksum output.  P602 is not a code.
Logged
iras24
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #4 on: November 30, 2022, 02:48:29 PM »

P0602 Control Module Programming Error
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)