Pages: 1 ... 3 4 [5]
Author Topic: Free ME7 Logging with VehiCAL Logger  (Read 32465 times)
darylw357
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #60 on: Yesterday at 09:11:47 AM »

I've used me7logger in the past but now I have a VX220 with the Z20LET engine and ME1.5.5 ECU. I've tried using opcom+cable but it's slow and limited rather like vcds is. I see my ecu should be supported under the adavanced protocols but what variables would this give me acccess to? Reluctant to buy a J2534 cable etc until I know this will do the job.
« Last Edit: Yesterday at 09:13:56 AM by darylw357 » Logged
prj
Hero Member
*****

Karma: +1074/-500
Offline Offline

Posts: 6067


« Reply #61 on: Yesterday at 09:33:00 AM »

All of the variables, only bitfields are missing in case of generated def.

And a proper J2534 cable is a good investment, there's thousands of different software applications that work with it.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
darylw357
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #62 on: Today at 05:52:32 AM »

Thanks I'll give it a try then with a cheap GODIAG cable and if thats no good then I'm looking at a Tactrix Openport 2.0.
Logged
prj
Hero Member
*****

Karma: +1074/-500
Offline Offline

Posts: 6067


« Reply #63 on: Today at 07:19:11 AM »

Thanks I'll give it a try then with a cheap GODIAG cable and if thats no good then I'm looking at a Tactrix Openport 2.0.
That cable does not work, not standards compliant:
https://docs.vehical.net/logger_tested_devices
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: 1 ... 3 4 [5]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)