Pages: [1]
Author Topic: Load increase → Actual Afr leaner  (Read 1781 times)
K92
Full Member
***

Karma: +0/-3
Offline Offline

Posts: 137


« on: January 20, 2023, 12:38:09 PM »

Car: Golf 4 4motion 1.8 ( fuelpump original )
Engine: 1.8T 110kw
Audi TT BAM injectors

Every time, i adjust IRL / IOP maps and increase load actual afr goes alot leaner, what could be the problem ?
Idle and Part trims are 0%, but WOT goes ~ +25
We also tested fuel pressure. At start ~2.9-3bar and drops to ~2.5 bar
Could the issue be fuel pump ?



Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1455


mk4 1.8T AUM


« Reply #1 on: January 20, 2023, 05:34:09 PM »

Fuel pressure should follow simple rule: fpr pressure + manifold pressure
I.e. at idle 3 - 0.7 = 2.3, at wot 3+0.7=3.7
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037


« Reply #2 on: January 20, 2023, 05:36:38 PM »

And fuel pressure should be measured on full load.
Measuring it at idle tells you absolutely nothing about it.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
K92
Full Member
***

Karma: +0/-3
Offline Offline

Posts: 137


« Reply #3 on: January 21, 2023, 01:04:02 AM »

These numbers were tested on full load. So lets say if im driving with 1bar boost and 3bar fpr on full load fuel gauge should hold 4 bar of fuel pressure ?
Then it seems i am  lacking 1+ bar on load
« Last Edit: January 21, 2023, 02:00:33 AM by K92 » Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1455


mk4 1.8T AUM


« Reply #4 on: January 21, 2023, 04:09:02 AM »

Check fpr vac line
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #5 on: January 21, 2023, 04:36:19 AM »

These numbers were tested on full load. So lets say if im driving with 1bar boost and 3bar fpr on full load fuel gauge should hold 4 bar of fuel pressure ?
Then it seems i am  lacking 1+ bar on load

This sounds like you need to give this car a complete checkover, and I'm pretty sure you'll need a fuel pump (upgrade possibly). Also, original pump, how about the fuel filter? probably never changed either, but hey yeah go on and bolt on injectors, turbos etc and go to town on it to make all the powerzzzzzzzzzzzz
Logged

I have no logs because I have a boost gauge (makes things easier)
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037


« Reply #6 on: January 21, 2023, 05:50:46 AM »

These numbers were tested on full load. So lets say if im driving with 1bar boost and 3bar fpr on full load fuel gauge should hold 4 bar of fuel pressure ?
Then it seems i am  lacking 1+ bar on load
Correct. And you need to fix that first before doing any more "full load" unless you want to put a hole in the block Smiley
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
K92
Full Member
***

Karma: +0/-3
Offline Offline

Posts: 137


« Reply #7 on: January 27, 2023, 10:51:51 AM »

Turned out to be bad/weak fuel pump.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.034 seconds with 17 queries. (Pretty URLs adds 0s, 0q)