Pages: [1]
Author Topic: need XDF file for Audi TT 225 8N0906018CB -0003  (Read 6747 times)
joshmuggs
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 33


« on: June 24, 2012, 07:18:26 AM »

Hi just downloaded the map off my Audi TT and would like a definition file for it so i can start tweeking it.
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #1 on: June 24, 2012, 09:45:13 AM »

You obviously havent really lOoked as I've posted one, not only that if you search harder you'll find a complete winols file with every single map! Have a search my friend
Logged
joshmuggs
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 33


« Reply #2 on: June 24, 2012, 09:53:51 AM »

Just found it, i couldnt get the search box on the forum to work properly had to go via google to find it. That xdf works fine with the map you posted but with mine it doesnt quite match up, any ideas???
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #3 on: June 24, 2012, 10:04:22 AM »

I'd say then my one was a 002 and yours the 003. You will be fine to flash the 002 onto your box, so at least you can use the xdf. Otherwise you'll need map analyser to put both maps into and search the maps and find the new addresses, easily enough done but a bit of a ball ache! I'd imagine there'd only a 1 or 2 address steps off, but to do the whole xdf when you can flash the 002 on isn't worth it.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)