Pages: [1]
Author Topic: airbag fault a4 b5  (Read 7289 times)
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 242


« on: February 09, 2023, 03:28:01 AM »

how to deactivate airbag seats? a4 b5 2000
I get an error like "resistance values ​​too high"

do you know the value  to put for seat airbag shunt?
thank

« Last Edit: February 09, 2023, 01:04:06 PM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
SAMTEKIC
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #1 on: February 09, 2023, 03:40:48 PM »

I USE CHINA CONNECTORS RESISTOR EASY TO PLUG IN
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #2 on: February 09, 2023, 07:19:47 PM »

This is a common error on the b5, you just need to wiggle connector and clear codes. It happens when you move the seats around, its very sensitive.
Logged
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 242


« Reply #3 on: February 10, 2023, 12:16:16 AM »

thank you, yes I had changed the resoldered connections (perhaps my welds are too coarse are resisting?) I manage to erase it well but it comes back after 4/5 start-up. I will recommend other resistors. I was told 2.2ohms??

I have to go back to the vcds to check the values. But for now I have my head in ols for stage1 and E85. 1 thing at a time for my little brain
« Last Edit: February 10, 2023, 12:26:14 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
royce5950
Sr. Member
****

Karma: +18/-44
Offline Offline

Posts: 376



« Reply #4 on: March 03, 2023, 05:51:01 AM »

did you end up solving the issue the way you described? I clicked to basically say the same exact thing @Blazius said however he beat me to it.
Logged

Purchase Tuned Files Ready To Be FlashedFor Audi / VW 1.8T & 2.0T Engines ➡️ TUNEDBYV3@GMAIL.COMSend Me An Email Now And Save BIG On A Performance Tuned File
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 242


« Reply #5 on: March 04, 2023, 05:36:59 AM »

did you end up solving the issue the way you described? I clicked to basically say the same exact thing @Blazius said however he beat me to it.

hello, no I even ended up soldering the wires directly and removing the connectors. I also have the famous code 65535. sometimes I manage to erase the crash data. but the seer always returns.
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 242


« Reply #6 on: March 09, 2023, 11:43:08 AM »

is it possible to recode the aibag? if I change the code in vcds coding I get the error "computer badly coded" I have many resistance values ​​too high seats and belts. but always come back '65635 intermittent'. I did not find the access code or secure access . I have 8D0959655J. erasing data crash / memory does not work.
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 242


« Reply #7 on: April 12, 2023, 08:33:36 AM »

I tried again with another computer. no communication . does anyone have an airbag file 8D0959655J?
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 242


« Reply #8 on: April 12, 2023, 11:04:47 AM »

it's ok i found it
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 242


« Reply #9 on: April 13, 2023, 04:28:00 AM »

ecu not found with vag eprom. I read dash eprom without problem. is this a k-line problem? thanks for the help
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)