Pages: [1]
Author Topic: hardcut with flames 906032HN  (Read 3315 times)
Marek7899
Newbie
*

Karma: +0/-5
Offline Offline

Posts: 3


« on: May 06, 2023, 04:05:17 AM »

Hi, I'm looking for a proven solution to get strong hardcut with flames. I have tried different configurations however there is an average crackle with no flames. Anyone able to help? My ori file in attachment. Thank you

HW: 0261207440
SW: 1037363908
SW upg.: 06A906032HN 0002
Logged
_nameless
Hero Member
*****

Karma: +374/-3442
Offline Offline

Posts: 3008



« Reply #1 on: May 06, 2023, 06:01:43 AM »

Hi, I'm looking for a proven solution to get strong hardcut with flames. I have tried different configurations however there is an average crackle with no flames. Anyone able to help? My ori file in attachment. Thank you

HW: 0261207440
SW: 1037363908
SW upg.: 06A906032HN 0002
First post here and you expect someone to make changes to your file? Gtfoh
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
Marek7899
Newbie
*

Karma: +0/-5
Offline Offline

Posts: 3


« Reply #2 on: May 06, 2023, 06:31:30 AM »

First post here and you expect someone to make changes to your file? Gtfoh

I don't expect a ready file, I'm just looking for a solution that guides me which groups to change.  Thanks for the answer
Logged
adam-
Hero Member
*****

Karma: +126/-41
Offline Offline

Posts: 2181


« Reply #3 on: May 06, 2023, 12:50:23 PM »

What have you attempted to change?
Logged
Marek7899
Newbie
*

Karma: +0/-5
Offline Offline

Posts: 3


« Reply #4 on: May 07, 2023, 12:22:11 PM »

I found a solution, the car had the revlimiter moved while driving. It was supposed to be hardcut to 7300. I didn't change the value for the revlimiter at a standstill. Problem solved
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.039 seconds with 14 queries. (Pretty URLs adds 0s, 0q)