Current AFR doesn't follow desired AFR

Pages: [1]

« previous next »

Author

Topic: Current AFR doesn't follow desired AFR (Read 3397 times)

zorgas

Newbie

Karma: +0/-0
Offline

Offline

Posts: 5

	Current AFR doesn't follow desired AFR « on: May 13, 2023, 01:11:28 AM »

Hello, so i ran into some problems when making some changed to ldrxn and kfmirl. After tweaking these 2 maps a bit, ive noticed that my current air fuel ratio doest follow my desired one. It seems to be running lean for some reason. Is there something I missunderstood about ldrxn and kfmirl maps and did something wrong, or is this something else ? My afr seems fine when i revert back the changes...

Audi A4 B6 1.8T BFB, 8E0909518AL


	Logged

zorgas

Newbie

Karma: +0/-0
Offline

Offline

Posts: 5

	Re: Current AFR doesn't follow desired AFR « Reply #1 on: May 13, 2023, 01:12:47 AM »

Attaching the bin file:


	Logged

fknbrkn

Hero Member

Karma: +186/-24
Offline

Offline

Posts: 1455

mk4 1.8T AUM

	Re: Current AFR doesn't follow desired AFR « Reply #2 on: May 13, 2023, 02:14:41 AM »

fr_w (lambda regulation) doesnt work probably due to some dtcs or something

its fine at stock but at higher loads with some fueling issues this could be the reason of lean condition


	Logged

zorgas

Newbie

Karma: +0/-0
Offline

Offline

Posts: 5

	Re: Current AFR doesn't follow desired AFR « Reply #3 on: May 13, 2023, 03:10:32 AM »

You are right. I made a mistake where i changed CWKONABG to 0, where as because it is a b6 it has to be changed to 1. That fixed the problem. Thank you


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 02:39:15 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search