Pages: [1]
Author Topic: obd read zf 6hp28af  (Read 1138 times)
lgtmelo
Full Member
***

Karma: +2/-13
Offline Offline

Posts: 115


« on: June 06, 2023, 10:01:15 AM »

hi, can anyone tell me what tool can read the binary from a zf6hp28af (audi s5 4.2 2011) via obd?

   Part No SW: 8K0 927 158 M    HW: 0B6 927 156
   Component: 0B6 42 FSIUSA H05 0003 
   Revision: --H05---   
Logged
prj
Hero Member
*****

Karma: +915/-426
Online Online

Posts: 5837


« Reply #1 on: June 06, 2023, 06:27:28 PM »

Flex.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
lgtmelo
Full Member
***

Karma: +2/-13
Offline Offline

Posts: 115


« Reply #2 on: June 07, 2023, 03:05:37 PM »

Flex.

thanks Smiley

if in the future someones needs this info, i found out pcm flash works too Smiley
Logged
cherry
Full Member
***

Karma: +24/-2
Offline Offline

Posts: 246


« Reply #3 on: June 07, 2023, 07:51:40 PM »

I dont think pcmflash has an option (in the moment) for VAG 6HP OBD. I think there is only a bench option, but this will require to remove ecu from gearbox.
Byteshooter could do these tcu via OBD too, but the tool does not exist anymore, last updates was nearly 10 years ago. This mini dsg reader clone tool has the option too, no clue if it´s working or not.
There are also service to convert sgo -> bin > sgo, but not sure if this is also available for uds versions.
Logged
prj
Hero Member
*****

Karma: +915/-426
Online Online

Posts: 5837


« Reply #4 on: June 08, 2023, 04:38:36 AM »

Yes, in PCMFlash AL651 (which is what this is) isn't listed, hence my recommendation.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)