NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Audi A4 B6 2.5 EDC15VM+ Immo Off Help Please
Pages: [1]
« previous next »
Author Topic: Audi A4 B6 2.5 EDC15VM+ Immo Off Help Please  (Read 2294 times)
gary_auto
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 12
« on: June 24, 2023, 09:07:12 AM »
Hi all , I'm trying to Immo off my ECU. I fitted a 2nd hand fuel pump (vp44) and now car stopped by Immo

I tryed vag k command (won't connect) even in xp

will vag tacho read ecu eeprom. I believe it will get my pin, but i dont have 2nd hand pump pin.

i have vcds cable and kkl 409.1 cable

please any help thanks
« Last Edit: June 24, 2023, 02:03:33 PM by gary_auto » Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204
« Reply #1 on: June 24, 2023, 01:51:34 PM »
Quote from: gary_auto on June 24, 2023, 09:07:12 AM
Hi all , I'm trying to Immo off my ECU. I fitted a 2nd hand fuel pump (vp44) and now car stopped by Immo

I tryed vag k command (won't connect) even in xp
share read eeprom and flash ecu
Logged
gary_auto
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 12
« Reply #2 on: June 24, 2023, 01:54:44 PM »
Quote from: elektronik13 on June 24, 2023, 01:51:34 PM
share read eeprom and flash ecu
What software?

Sent from my DN2103 using Tapatalk
Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204
« Reply #3 on: June 24, 2023, 02:01:37 PM »
Quote from: gary_auto on June 24, 2023, 01:54:44 PM
What software?

Sent from my DN2103 using Tapatalk


I don't understand what you mean
Logged
gary_auto
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 12
« Reply #4 on: June 24, 2023, 02:04:31 PM »
Quote from: elektronik13 on June 24, 2023, 02:01:37 PM
I don't understand what you mean

updated #1 post as it didnt show all.

what software can i use to read eeprom? thanks.
Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204
« Reply #5 on: June 24, 2023, 02:10:10 PM »
Quote from: gary_auto on June 24, 2023, 02:04:31 PM
updated #1 post as it didnt show all.

what software can i use to read eeprom? thanks.
Mpps19 reads eeprom and flash
The programs you have probably do not read this ecu
Logged
Filipe39
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 13
« Reply #6 on: July 18, 2023, 07:11:02 AM »
You can also use KTAG for example, but vagcommander must work for EEPROM, you have to have a problem somewhere...
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2806
« Reply #7 on: July 18, 2023, 07:22:41 AM »
Quote from: Filipe39 on July 18, 2023, 07:11:02 AM
You can also use KTAG for example, but vagcommander must work for EEPROM, you have to have a problem somewhere...
Ktag has no support for edc15...
Logged
Giving your mom a tuneup
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • December 04, 2024, 01:00:32 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)