DENSO SW-L35HED000.HEX

Pages: [1]

« previous next »

Author

Topic: DENSO SW-L35HED000.HEX (Read 4426 times)

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	DENSO SW-L35HED000.HEX « on: July 07, 2023, 12:01:37 PM »

Hello, after great battles, I loaded the soft from Mazda 3mps and now I need a definition file, maybe someone has it, thank you in advance. Of course, any advice regarding this ecu and the car and the checksum, etc. are welcome.


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: DENSO SW-L35HED000.HEX « Reply #1 on: July 13, 2023, 02:35:51 PM »

I searched a bit, I don't know if the correct software name is DENSO SW-L35HED000.HEX or SW-L35HED, I think I found the required Lambda address =032698 hex=3f800000 start and end 032B6C hex 3f33b646.


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: DENSO SW-L35HED000.HEX « Reply #2 on: July 13, 2023, 02:43:38 PM »

And as for the Mazda project, the engine after engine renovation, additionally forged connecting rods and pistons in the original plan will reach 400 HP, but without a definition file, etc. it will be hard.


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: DENSO SW-L35HED000.HEX « Reply #3 on: July 13, 2023, 04:19:02 PM »

Colleagues, answer something, I attack the sun with a hoe.


	Logged

Geomeo

Full Member

Karma: +11/-6
Offline

Offline

Posts: 152

	Re: DENSO SW-L35HED000.HEX « Reply #4 on: July 13, 2023, 04:23:13 PM »

I don't think you can attack the sun with a hoe, but it will be hoe-larious watching you try. DON"T DO DRUGS! DRUGS ARE BAD!!


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: DENSO SW-L35HED000.HEX « Reply #5 on: July 26, 2023, 03:33:38 PM »

maybe someone has an idea where to buy such a definition for this mazda mps nice equipment under construction.


	Logged

Neight

Newbie

Karma: +1/-0
Offline

Offline

Posts: 10

	Re: DENSO SW-L35HED000.HEX « Reply #6 on: July 27, 2023, 10:12:24 AM »

Quote from: pinokio1979 on July 26, 2023, 03:33:38 PM

maybe someone has an idea where to buy such a definition for this mazda mps nice equipment under construction.

ECMTitanium has a driver for your file. While definitions are vague and usually title wrong you can sort through most if it.


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: DENSO SW-L35HED000.HEX « Reply #7 on: July 28, 2023, 02:44:38 PM »

and in what version because I don't have only this ECM Titanium 40k in the previous ones.


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: DENSO SW-L35HED000.HEX « Reply #8 on: July 28, 2023, 02:50:02 PM »

It was incomprehensible. I don't have the ECM Titanium 40k version. Older versions do not have a definition file.


	Logged

Majster321

Newbie

Karma: +1/-0
Offline

Offline

Posts: 1

	Re: DENSO SW-L35HED000.HEX « Reply #9 on: October 25, 2023, 01:40:53 PM »

Does anyone have definition files for sale for this ecu maybe? Need one for older version of Ecm Titanium


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 04:00:11 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search