Me7eeprom_st10.exe port question

Pages: [1]

« previous next »

Author

Topic: Me7eeprom_st10.exe port question (Read 3421 times)

Rick81

Full Member

Karma: +0/-11
Offline

Offline

Posts: 99

	Me7eeprom_st10.exe port question « on: July 14, 2023, 02:39:31 AM »

Hi today ive finally had the time to sitdown and do some learning . So ive download the me7eeprom file gone in to the command section and had a good luck

tested with out connecting to the car to see if ive got it correct and i have .It says open then closes which is fine i know its not connected to the car .But when it finishes it comes up with port one . Is it a must it has to run on port one ? on my laptop i only have to usb ports and no matter which port i plug into they say port 3 in device manager even though i try and switch it to port 1

kind regards


	Logged

Rick81

Full Member

Karma: +0/-11
Offline

Offline

Posts: 99

	Re: Me7eeprom_st10.exe port question « Reply #1 on: July 14, 2023, 07:50:13 PM »

This is where I'm at with this .

It says to select baud rate 9600 . In the picture below I'm getting opening com port 1...unable to open comport
closing port 1 . But it has a baud rate of 10400

Am I missing something

Kind regard


	Logged

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: Me7eeprom_st10.exe port question « Reply #2 on: July 14, 2023, 09:33:51 PM »

Change the 1 to a 3.


	Logged

Rick81

Full Member

Karma: +0/-11
Offline

Offline

Posts: 99

	Re: Me7eeprom_st10.exe port question « Reply #3 on: July 15, 2023, 05:06:41 PM »

Thankyou for your help


	Logged

Rick81

Full Member

Karma: +0/-11
Offline

Offline

Posts: 99

	Re: Me7eeprom_st10.exe port question « Reply #4 on: July 16, 2023, 12:49:14 AM »

How do i change the com port in the me7eeprom.exe program


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 12:45:11 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search