ME7.5 Problem with hardcut

Pages: [1]

« previous next »

Author

Topic: ME7.5 Problem with hardcut (Read 1354 times)

xCyberLV

Newbie

Karma: +0/-1
Offline

Offline

Posts: 1

	ME7.5 Problem with hardcut « on: July 24, 2023, 06:50:41 AM »

Hello, I have a problem with HardCut not working, I have set FTOMN to 0, changed KFSZT, KFTSRL, NMAX, NMAXDVG, DNMAXH, NMAXDV.

But hardcut is not working, if I set KFSZT and KFSTSRL to 6600 RPM (also tried lower and bigger values), and NMAX to 7000, car goes over 6600 RPM to 7000 and does not hardcut. I tried DNMAXH to set 50, 100 and 200, the results are the same.

I don't know what I am missing more there as I have tried everything.

It is 1.8t - ECU nr. 4B0906018AA

I have added my changed file and mappack for that.


	Logged

Leonhard

Full Member

Karma: +29/-2
Offline

Offline

Posts: 115

	Re: ME7.5 Problem with hardcut « Reply #1 on: July 27, 2023, 11:47:13 PM »

hardcut is fuel-injection related (Einspritzausblendung = injection turned off -> B_nmaxh)

hardcut -> nmot = NMAXOG + DNMAXH

NMAXOG = increased NMAX
DNMAXH = delta nmot for injection turned off (hysteresis)

usually you have:

NMAX = 6600
NMAXOG = 6600
DNMAXH = 200


	Logged

Pendrak

Newbie

Karma: +1/-1
Offline

Offline

Posts: 13

	Re: ME7.5 Problem with hardcut « Reply #2 on: July 28, 2023, 02:34:30 AM »

Do you have any fault's in ECU?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 03:32:04 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search