Sup fellas, me and a friend put a “hard cut” limiter on his narrowband me7.5 and it worked like a charm for around 30 min and then he shut it off. Once we decided to go get some food it just cranked and wouldn’t start. Mpps kept saying “ecu not found”(it did this before but then it worked after cycling the ignition and restarting the program a couple of times). Could this be a bricked ecu? We hope it’s just the fuel pump relay since it doesn’t prime the pump when the key is turned but that also could be that the relay isn’t receiving any signal from the ecu. Any advice is golden
thanks
(Thought it wouldn’t do anything to the ecu since it’s not like LC on a 512kb file where you have to basically add code, I just did ignition cut at 6500-6550rpm)
