Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Why is this not flashing?
Pages: [
1
]
« previous
next »
Author
Topic: Why is this not flashing? (Read 4160 times)
nubtuner
Newbie
Karma: +0/-0
Offline
Posts: 7
Why is this not flashing?
« on: July 07, 2012, 11:00:39 AM »
Connecting...
Starting slow init connection.
Connecting to address 0x01.
Slow init succeeded.
Switching to KWP1281 session.
KWP1281 connect info: 8D0907551T 2.7l V6/5VT G 0003
Connected
Disabling Windows sleep mode.
Writing ECU flash memory.
ECU reports programming session preconditions have been met.
Negotiating communication timings.
Successfully changed to new communication timings.
Requesting security access.
ECU reports that security access request was rejected.
Starting diagnostic session.
Successfully started diagnostic session.
Negotiating communication timings.
This is what im getting and that is all i get. is there something im doing wrong?
Logged
nubtuner
Newbie
Karma: +0/-0
Offline
Posts: 7
Re: Why is this not flashing?
« Reply #1 on: July 07, 2012, 11:08:04 AM »
07/Jul/2012 11:04:55.658: LOG: Could not construct valid message from received data: InvalidChecksum
07/Jul/2012 11:04:55.659: LOG: Removing first byte from the receive buffer to try to create a valid message. Removed: 0x07
07/Jul/2012 11:04:55.687: LOG: Could not construct valid message from received data: InvalidChecksum
07/Jul/2012 11:04:55.687: LOG: Removing first byte from the receive buffer to try to create a valid message. Removed: 0x07
07/Jul/2012 11:04:55.718: LOG: Could not construct valid message from received data: InvalidChecksum
Judging by this, i have invalid checksums?
Logged
Vdub-dub
Full Member
Karma: +4/-1
Offline
Posts: 136
Re: Why is this not flashing?
« Reply #2 on: July 07, 2012, 11:22:32 AM »
at a guess as checksum is incorrect reckon need boot mode with galletoo etc to write a good map on
Logged
nubtuner
Newbie
Karma: +0/-0
Offline
Posts: 7
Re: Why is this not flashing?
« Reply #3 on: July 07, 2012, 11:29:04 AM »
Would it work if someone were able to update the checksums?
Logged
Vdub-dub
Full Member
Karma: +4/-1
Offline
Posts: 136
Re: Why is this not flashing?
« Reply #4 on: July 08, 2012, 10:57:46 AM »
as you have a bad checksum already on there may need boot mode to write to it but not with nefmoto sw
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 27, 2024, 12:35:22 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
