Hi All.

I am trying to adjust the KFLDRAPP & KFLDIMX tables for my turbo (GT28).  I have switched CWMDAPP to 8 (00001000) from the ORI 3 (00000011).  This switched off the O2 sensor.
I am trying to follow this method of tuning however there are still things that are not clear for me.
http://nefariousmotorsports.com/forum/index.php?topic=517.msg4013#msg4013

My assumptions (forgive me if this is incorrect) and questions
1) CWMDAPP enables table KLFDRAPP in order to use that table to find the correct WGDC for the boost profile that you want to run
2) Was CWMDAPP supposed to switch off the O2 sensor?
3) Does anyone have a key for what each digit stands for (note that changing from 3 to 8 switches the last 2 bits to 00, maybe 1 of then should be switched? - I dont know)
2) Once KFLDRL & KFLDIMX is tuned, do you then revert table KFLDRAPP to ori and switch CWMDAPP back to 3 (00000011)?

I have included the BIN file below.  Any other pointers on the file will be appreciated. Thanks in advance for your help

Also if you read the fr properly, you would understand that each codeword (8 bit) contains 8 bits in binary, each byte in enables or disables a function. For instance , cwdapp decimal 8 is 00001000, the bit in 4 position enables kfldrapp.


Enviado do meu M2102J20SG através do Tapatalk

Yes, I did find the definitions