Pages: [1]
Author Topic: Looking for 2017 Audi A6 2.0tsfi XDF // 4G5907115C  (Read 2414 times)
sinatra
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 3


« on: September 23, 2023, 09:50:05 AM »

Currently have the .bin file for TunerPro for my daily but having a hard time trying to find the appropriate XDF file for the FL_4G5907115C__0004.bin file.
If someone has the OLS Definition file that would work as well as I'm able to export it to a XDF.

SW#: 4G5907115C
SW Version: 0001
HW#: 8T2907115
HW Version: H13

Been able to tune my MK7 IS20 (full E) GTI successfully and after further testing and tuning with the vehicle my end point with the stock IS20 was 9.64s 60-130MPH.
The A6 is my daily, and just looking for a little power upgrade  to the car as it'll stay stage 1.

Thank you.
Logged
sinatra
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 3


« Reply #1 on: September 23, 2023, 10:44:00 AM »

For anyone interested in the stock .bin file for 4G5907115C, here it is!

Zipped for compression, full 4MB .bin Cool
Logged
d3irb
Full Member
***

Karma: +134/-1
Offline Offline

Posts: 195


« Reply #2 on: September 23, 2023, 10:45:58 AM »

This file has project structure `L86` / SC800L86.  It's better to look for Simos18 definitions based on this than the box code, since often the same project structure (application software version) is used across many box codes.

I'm not sure how common the A2L for this version is and thus how much trouble you'll have finding it.
Logged
sinatra
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 3


« Reply #3 on: September 23, 2023, 10:48:55 AM »

I have a lot of 18.1 definition/XDF files from tuning 15-19 R's, S3's, & GTI's, checked all of them and they don't seem to format correctly on Tuner Pro.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)