Pages: [1]
Author Topic: audi ME3.8 immo off. the middle child of ecu's  (Read 2795 times)
duelingdanjo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« on: October 13, 2023, 01:56:32 AM »

hello, Anyone know of any checksum calculating tools that will work? i have read the bin file but the tools I've seen don't say anything about ME3.8

https://drive.google.com/file/d/1RIxOiZRFDFKSQ7AuJEc_oCnnvqKiW_bE/view?usp=sharing
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #1 on: October 13, 2023, 01:59:51 AM »

ME3.8 doesn't exist.
Logged

I have no logs because I have a boost gauge (makes things easier)
duelingdanjo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #2 on: October 13, 2023, 04:03:15 AM »

the ECU number is 4D0907551R its a 99 A6 2.8 30v. sorry the table i looked at online said ME3.8. something. any idea which it is?
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6040


« Reply #3 on: October 13, 2023, 08:16:29 AM »

Sounds like M3.8.2 with OTP chips.

"ME3.8" does not exist. E stands for electronic throttle, this is a cable throttle car, there are no variants of M3.8 that have a fully electronic throttle.
They just have the idler motor built into the throttle.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204


« Reply #4 on: October 13, 2023, 03:19:13 PM »

the ECU number is 4D0907551R its a 99 A6 2.8 30v. sorry the table i looked at online said ME3.8. something. any idea which it is?
why do you need crc counting, you damaged the eeprom
I can count the crc in eeprom for you
Logged
duelingdanjo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #5 on: October 14, 2023, 05:24:36 AM »

how is it damaged does the current crc not check out? i can try give it another read
Logged
duelingdanjo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #6 on: October 14, 2023, 06:08:11 AM »

Sounds like M3.8.2 with OTP chips.

ah bugger otp chips know of any other options? could i buy another eeprom or swap the ecu?

Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6040


« Reply #7 on: October 14, 2023, 04:52:03 PM »

Immo off can be done in EEPROM, which is not OTP. So for that you don't need a new chip.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
duelingdanjo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #8 on: October 16, 2023, 08:17:18 AM »

think ive got it, if i get the checksum wrong will it still drive with the eeprom error code?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)