Pages: [1]
Author Topic: ME 7.5 After flash with mpps car runsfine but not able to flash anymore? (FIXED)  (Read 1821 times)
beyda
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4



Hey guys,

i have a problem, so i flash my car several times with mpps but after my last flash im not able to write via obd anymore.

mpps says ecu not found, read id also not work.
i can log the car with vcds and i have no DTCs.

so what went wrong? the only diffrent i made is to put a new clutch in it so i thinks this can not cause the problem.

i try to remove the dashfuse -> not working
checked the harness -> all ok

checksum is ok

« Last Edit: November 04, 2023, 11:30:37 AM by beyda » Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: October 31, 2023, 11:09:10 PM »

boot mode or spare ecu.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 241


« Reply #2 on: October 31, 2023, 11:42:05 PM »

some china mpps are limited....
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600


« Reply #3 on: November 02, 2023, 12:33:45 AM »

use nefmoto software if you have vcds
Logged
beyda
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #4 on: November 04, 2023, 10:26:21 AM »

Thx for reply,

Nefmoto is not working on both pc I have ko idea what I am doing wrong.

I got an spare ecu with same sw and hw numbers.
So can I connect an flash my file on these with obd?

Or need to do immo off?
Logged
beyda
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #5 on: November 04, 2023, 10:40:13 AM »

Yesterday I was able to flash and all was good.

But today : ecu not found.

When I flash or read ecu Id  I hear my original vw amplifier in the rear making ticking noise.
I unplucked it but it makes no different to get connections to ecu.

What the hell is going on this car.
Logged
beyda
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4



fixed the problem.

i screwd up my ecu and do some high complex NASA shit... Pull out my Heatgun and cooked it by 350°C for about 30 seconds.
now it work...
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 15 queries. (Pretty URLs adds 0.001s, 0q)