flash file doesn't work

Pages: [1]

« previous next »

Author

Topic: flash file doesn't work (Read 2193 times)

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	flash file doesn't work « on: November 09, 2023, 09:31:02 AM »

I changed NMAXF to 3300,
NMAX to 3000
But I can still exceed that to 5000 rpm just like the file didn't work.
Flashed using nefmoto with a KKL cable, and then pulled the file using galletto.
I compared the files. The read file after flashing is the same as the file I wanted to write. I don't understand what goes wrong.

Sorry if the question look dumb, I tried my best to figure it out.


« Last Edit: November 09, 2023, 09:43:51 AM by chito »	Logged

Audi A6 C5 1.8T

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2800

	Re: flash file doesn't work « Reply #1 on: November 09, 2023, 10:14:34 AM »

Quote from: chito on November 09, 2023, 09:31:02 AM

So you are trying to make a stationary rev limiter? You need more than just the one value. There's a whole thread that exists on that


	Logged

Giving your mom a tuneup

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: flash file doesn't work « Reply #2 on: November 09, 2023, 07:03:07 PM »

Quote from: _nameless on November 09, 2023, 10:14:34 AM

So you are trying to make a stationary rev limiter? You need more than just the one value. There's a whole thread that exists on that

Thanks. Did you mean hard cut limiter?
Also what does NMAX and NMAXF do in this case?


	Logged

Audi A6 C5 1.8T

JeanAwt

Full Member

Karma: +10/-12
Offline

Offline

Posts: 241

	Re: flash file doesn't work « Reply #3 on: November 10, 2023, 01:13:41 AM »

you want a hard cut at 3000??why? it's not a tdi. Use the search bar. even on youtube there is information.nmax is a limitation. for hard CUT you need a cut....so...closing map.


	Logged

A4 B5 avant 1.8T 2000 NO QUATTRO

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: flash file doesn't work « Reply #4 on: November 11, 2023, 06:31:29 AM »

Quote from: JeanAwt on November 10, 2023, 01:13:41 AM

you want a hard cut at 3000??why? it's not a tdi. Use the search bar. even on youtube there is information.nmax is a limitation. for hard CUT you need a cut....so...closing map.

I don't want a hard cut at 3000. I just want to figure out what NMAX and NMAXF do cuz I set them to 3000 and nothing happens.


	Logged

Audi A6 C5 1.8T

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2800

	Re: flash file doesn't work « Reply #5 on: November 11, 2023, 07:03:49 AM »

NMAXF is RPM DTC limit. NMAX is an actual rev limiter.


« Last Edit: November 11, 2023, 07:05:54 AM by _nameless »	Logged

Giving your mom a tuneup

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: flash file doesn't work « Reply #6 on: November 14, 2023, 01:52:35 AM »

Quote from: _nameless on November 11, 2023, 07:03:49 AM

NMAXF is RPM DTC limit. NMAX is an actual rev limiter.

I changed NMAX to 3000, but rpm can still go over that. Why is that?


	Logged

Audi A6 C5 1.8T

gremlin

Hero Member

Karma: +196/-9
Offline

Offline

Posts: 652

	Re: flash file doesn't work « Reply #7 on: November 14, 2023, 03:17:56 AM »

Quote from: chito on November 14, 2023, 01:52:35 AM

I changed NMAX to 3000, but rpm can still go over that. Why is that?

Try to change NMAXGA map.


	Logged

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: flash file doesn't work « Reply #8 on: November 15, 2023, 10:05:19 PM »

Quote from: gremlin on November 14, 2023, 03:17:56 AM

Try to change NMAXGA map.

Thanks! That works.


	Logged

Audi A6 C5 1.8T

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 06:28:27 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search