Pages: [1]
Author Topic: Simos 18.1 golf mk7 R sport display-help  (Read 1922 times)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« on: November 25, 2023, 03:55:49 AM »

Please someone can help me with performance gauges in Golf mk7 R? I did remap, all ok, but in MIB I still see 228kw, I changed map DATA_Disp_pwrDrvInfo.Disp_pwrDrvDispMax_C_VW, I changed it from 228kw to 280kw but It still show max 228kw. Is there some another map?

And similar problem I have with displayed boost pressure, in MIB it allways show me boost pressure which I have in map called c_bop_max_disp, is there some switch for switching between c_bop_max_disp and real boost pressure?
Logged
Silencesilja
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 10


« Reply #1 on: November 25, 2023, 09:01:40 AM »

For boost, you should find the max value for performance display in c_bop_max_disp.
For power, the calculation comes from torque and rpm, bit limited by the third max power, so you should be looking at c_pow_can for limit and DATA_Disp_pwrDrvInfo.Disp_tqDrvDispMax_C_VW
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #2 on: November 25, 2023, 01:12:23 PM »

thank you, so there is not some switch for real boost? it will be allways show value which is in c_bop_max_disp ?
Logged
Silencesilja
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 10


« Reply #3 on: November 26, 2023, 09:58:03 AM »

I'm not sure if I understood what your problem is in regard of boost pressure display,
but the changes I made in mine are just step value gradient limitations so that the display has less delay in lower rpms,
and I lowered the minimum engine speed for boost pressure display so that it does not show 0 pressure outside of sport mode at idle.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)