Pages: [1]
Author Topic: Separate Kline from ECU (ME7logger)  (Read 3828 times)
PaulB
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17


« on: December 03, 2023, 07:35:18 AM »

HEllo!

Just a question..

Ecu : ME7.5 , Car Audi A3 1998 1.8T

I would like to run a separate Kline to my OBD port , directly from the ECU to my VCDS cable , so i can use Me7logger without interference from the cluster. (i can't log without the cluster fuse on , and when i put it back the ME7logger crashes)

The questions is : should i cut the original cars Kline to the Cluster? Does it interfere ''backwards''?

Thank you
Logged
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 241


« Reply #1 on: December 03, 2023, 08:14:59 AM »

putting a switch should be enough
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)