NefMoto > Technical > Tuning > Documents & Helpers & How To's > data logging errors log 1.8 t 20v aum
Pages: [1]
« previous next »
Author Topic: data logging errors log 1.8 t 20v aum  (Read 1937 times)
madmick
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6
« on: January 05, 2024, 10:52:40 AM »
hi all and happy new year

im wondering if someone could explain logging errors and eeprom a bit to me and is my ecu flashable or via boot mode only thanks
Logged
Pretty Womans from your city
aef
Hero Member
*****

Karma: +70/-46
Online Online

Posts: 1601
« Reply #1 on: January 06, 2024, 07:03:11 AM »
what are you talking about and what is this random file for?
Logged
madmick
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6
« Reply #2 on: January 07, 2024, 01:31:02 PM »
im asking advice on the crash error reports from reading ecu
Logged
Pretty Womans from your city
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #3 on: January 07, 2024, 02:16:39 PM »
There's nothing of value in that file; not is it used for ME7Logger (I'm assuming you're trying to use that).

Your ECU is flashable over OBD.
Logged
madmick
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6
« Reply #4 on: January 07, 2024, 04:05:10 PM »
thank you yes i was trying to determine what ecu was as i ha 2 here both from aum but different numbers 06A906032HJ 0002 and  06A906032HN was having issues trying to get them to read and i have some issues with the  06A906032HN i have read the eeprom but i seem to have lost the settings for steering angle sensor and also few other dtcs now so im trying to get some advice to correct this sorry if i have asked wrongly or in the wrong way just a noobie error appriciate yor feedback so i can understand to fix the issues moving forward  Wink
Logged
Pretty Womans from your city
madmick
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6
« Reply #5 on: January 07, 2024, 04:40:53 PM »
Quote from: madmick on January 07, 2024, 04:05:10 PM
thank you yes i was trying to determine what ecu was as i ha 2 here both from aum but different numbers 06A906032HJ 0002 and  06A906032HN was having issues trying to get them to read and i have some issues with the  06A906032HN i have read the eeprom but i seem to have lost the settings for steering angle sensor and also few other dtcs now so im trying to get some advice to correct this sorry if i have asked wrongly or in the wrong way just a noobie error appriciate yor feedback so i can understand to fix the issues moving forward  Wink if someone could check the eeprom and let me know the errors much appriciated great reading through forum and learning and gaining some insight from some tech savvy guys great stuff  Smiley
Logged
Pretty Womans from your city
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #6 on: January 07, 2024, 08:45:32 PM »
You've loaded a cluster bin into TunerPro for a definition of a DR ECU, not an HJ or HN. 
Logged
madmick
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6
« Reply #7 on: January 07, 2024, 10:12:05 PM »
Quote from: adam- on January 07, 2024, 08:45:32 PM
You've loaded a cluster bin into TunerPro for a definition of a DR ECU, not an HJ or HN. 
 

EEPROM should be this file
Logged
Pretty Womans from your city
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #8 on: January 07, 2024, 11:15:29 PM »
That's for the cluster.  What are you trying to do?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 10:54:25 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 19 queries. (Pretty URLs adds 0s, 0q)