Pages: [1]
Author Topic: 02 sensors for ME7.1 and ME7.1.1  (Read 1775 times)
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« on: March 04, 2024, 08:00:32 AM »

I have put 02 sensors from ME7.1.1 on ME7.1
I can see 02 voltage and it looks normal, but fuel trims does not work. And I get error
Oxygen (Lambda) Sensor B1 S1: No Activity
Oxygen (Lambda) Sensor B2 S1: No Activity

They have different 02 plug, but 02 sensors schoud be same or?
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #1 on: March 05, 2024, 10:13:27 AM »

define "normal" voltage please? also, what kind of ME7.1.1 exactly?
Logged

I have no logs because I have a boost gauge (makes things easier)
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #2 on: March 05, 2024, 10:31:02 AM »

Are you sure one isn't LSU4.2 and the other LSU4.9?
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #3 on: March 05, 2024, 01:18:17 PM »

Sorry for lack of information, I forget that there is a so many variants od ME7.1.1

In my case I am talking about 2.7 TT engines
ECU is ME7.1 AMX 2.8 N/A, and probes are from M7.1.1 BEL
They are both narowband only they have different connector.

When I say normal voltage that mean it folows what my external afr gauge show( when it is lean voltage is below 0.45 V goes to 0.1V and when it is rich it goes to 0.9.
It show normal voltage depend how engine work like any other narowband probe
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #4 on: March 06, 2024, 04:36:12 AM »

There are many different types of narrowband sensors.
Buy the correct ones for your engine and don't waste time.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #5 on: June 09, 2024, 01:19:31 AM »

Problem was wrong set up for rear O2 off. I accidentally turned off diagnostic for front 02.
Now trims are working and no more DTC
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)