piotrea113
Newbie
Karma: +0/-0
 Offline
Posts: 2
|
 |
« on: April 25, 2024, 04:07:07 AM »
|
|
|
Hello Friends,
I am looking for help. My car probably fell into the hands of a weak tuner... I prepared the following setup:
- Stock block
- FMIC 600x300x76 intercooler
- turbo rs3
- injectors for 450 bhp at 140b
- FPRV from rs4
- HPFP VIS stage 1
- rs3 fuel pump in the tank
- Downpipe 76mm
- intake 76mm + cone filter
- new NGK pfr7q spark plugs + new coils
from the very beginning, the tuner had a problem with controlling HPFP on the FPRV AKS 175b valve. The car was flooded with fuel from 6,000 rpm. I installed FPRV from rs4. The problem is gone. This made me think that the tuner had an average understanding of...
I bought injectors for which I received information that they should have injection settings from rs3 8v injectors pre-facelift and krkte 0.0261.
The car starts very poorly on a cold engine.
From the logs I see that the mass flow meter shows a maximum of 258g, which does not indicate a power of over 400 bhp. We know that the car drives much better than the Golf VII R. In my opinion, the flow meter is incorrectly calibrated for a 76mm intake.
Would someone be kind enough to review my program...
|
|
|
|
|
Logged
|
|
