Pages: [1]
Author Topic: ECU swap, weird lean condition  (Read 4201 times)
orienz
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 113


« on: July 19, 2012, 01:11:16 PM »

Hey guys,

I put 06A906032AR ECU in place of an 06A906032HN ECU because I also swapped the engine and got this ECU from doner car. However my fuel trims are like +25% now. I guess car is for some reason running lean (according to new ECU). All harness and O2 sensors are from original AUM engine.
I also noticed that 06A906032AR ECU is 512kb instead of 1MB HN.

Does anyone know why this happens? Thanks!
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654


« Reply #1 on: July 20, 2012, 03:41:03 PM »

I put 06A906032AR ECU in place of an 06A906032HN Does anyone know why this happens? Thanks!

ECUs are principially different in part of type O2S used.
HN use WBO2S as precat sensor, AR - simple level switched O2S.
First you must correctly rework wiring loom and O2S corresponding new ECU shematic.
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654


« Reply #2 on: July 20, 2012, 03:59:30 PM »

ECUs are principially different in part of type O2S used.

For reference take a look on O2S connections for both ECUs
 
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654


« Reply #3 on: July 20, 2012, 05:12:44 PM »

First you must correctly rework wiring loom and O2S corresponding new ECU shematic.

But...
IMHO it's better and more progressive to adapt HN-ECU for control swapped engine.
 
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136


« Reply #4 on: July 21, 2012, 01:14:41 PM »

AUM ecu on AR ecu no good and a step back keep AUM loom and HN ecu wide band much better
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 18 queries. (Pretty URLs adds 0s, 0q)