NefMoto > ECU Files > ECU Definition Files > ECU Definition File Requests > 0281010741 Alfa 2.4 JTD 150 CV EDC15C7 Mappack or Help needed.
Pages: [1]
« previous next »
Author Topic: 0281010741 Alfa 2.4 JTD 150 CV EDC15C7 Mappack or Help needed.  (Read 3151 times)
Steven97i1
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 94
Hello guys, you are my only hope now!
I got a new car an Alfa romeo 2.4jtd 150CV with edc15c7 ECU.

for VW EDC15 Ecus there is VAGEDCSUITE but i cant seem to find any maps on this file.

Car had a bad tune, flashed ori and now i miss my power Cheesy

Can someone Please help me?

Attached Ori file

I searched Complete net, got on Polish and Russian Sites for a Mappack.

I can find EGR and Duration map but thats it!
Logged
Searching for All XDF for an Free XDF database ONLY for nefariousmotorsports.com
prj
Hero Member
*****

Karma: +1083/-511
Offline Offline

Posts: 6130
« Reply #1 on: May 28, 2024, 09:26:17 AM »
There's damos floating around for this stuff on the web and it's an EDC15 so even without one it's trivial.

Did you even try?
78844 IQL, 78B18 SL, 77CAE boost setpoint, 77AD4 boost pATM limit, 77AD0 SVBL, 7A820 SVBL, SOI stuff starts at 7316A, Rail stuff at 79BE2...
« Last Edit: May 28, 2024, 09:29:47 AM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Steven97i1
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 94
« Reply #2 on: May 29, 2024, 05:00:11 PM »
Hey thanks, sorry first time trying to figure out how the Mars should Look like!

Thanks for the Pointers!

Sadly i only find damos of 1.9 jtd and thats the wrong one.
Logged
Searching for All XDF for an Free XDF database ONLY for nefariousmotorsports.com
prj
Hero Member
*****

Karma: +1083/-511
Offline Offline

Posts: 6130
« Reply #3 on: May 29, 2024, 10:32:11 PM »
Quote from: Steven97i1 on May 29, 2024, 05:00:11 PM
Sadly i only find damos of 1.9 jtd and thats the wrong one.
Your file is extremely similar to that damos. Try to learn to use WinOLS in compare mode.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Steven97i1
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 94
« Reply #4 on: May 30, 2024, 03:31:09 PM »
Quote from: prj on May 29, 2024, 10:32:11 PM
Your file is extremely similar to that damos. Try to learn to use WinOLS in compare mode.

Yes but sadly most of the maps i cant realy recognize Cheesy

like the durations maps are pretty easy or EGR

but there are like 6 or 8 Different Torque limiters alone for normal driving condition.
Logged
Searching for All XDF for an Free XDF database ONLY for nefariousmotorsports.com
prj
Hero Member
*****

Karma: +1083/-511
Offline Offline

Posts: 6130
« Reply #5 on: May 31, 2024, 01:22:22 AM »
Quote from: Steven97i1 on May 30, 2024, 03:31:09 PM
Yes but sadly most of the maps i cant realy recognize Cheesy
I am not sure what there is to recognize?
Open the damos, it tells you exactly what everything is.

And no there aren't that amount of TQL in your file that are active...

Put the 1.9 JTD damos in compare mode in OLS and you can define almost the entire file.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Steven97i1
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 94
« Reply #6 on: May 31, 2024, 04:25:05 AM »
Quote from: prj on May 31, 2024, 01:22:22 AM
I am not sure what there is to recognize?
Open the damos, it tells you exactly what everything is.

And no there aren't that amount of TQL in your file that are active...

Put the 1.9 JTD damos in compare mode in OLS and you can define almost the entire file.


next dumb question, how do i open the Compare mode? Cheesy i never realy used Winols besides with the right Damos for the files.
Logged
Searching for All XDF for an Free XDF database ONLY for nefariousmotorsports.com
Steven97i1
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 94
« Reply #7 on: May 31, 2024, 04:27:07 AM »
Quote from: prj on May 31, 2024, 01:22:22 AM
I am not sure what there is to recognize?
Open the damos, it tells you exactly what everything is.

And no there aren't that amount of TQL in your file that are active...

Put the 1.9 JTD damos in compare mode in OLS and you can define almost the entire file.


and torque by gear should be enabled or not?
Logged
Searching for All XDF for an Free XDF database ONLY for nefariousmotorsports.com
Steven97i1
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 94
« Reply #8 on: June 01, 2024, 04:02:30 AM »
Quote from: prj on May 31, 2024, 01:22:22 AM
I am not sure what there is to recognize?
Open the damos, it tells you exactly what everything is.

And no there aren't that amount of TQL in your file that are active...

Put the 1.9 JTD damos in compare mode in OLS and you can define almost the entire file.

Every Damos or mappack says after importing Adress 00000
So sadly i cant just pin point some of the maps
Logged
Searching for All XDF for an Free XDF database ONLY for nefariousmotorsports.com
prj
Hero Member
*****

Karma: +1083/-511
Offline Offline

Posts: 6130
« Reply #9 on: June 01, 2024, 10:43:16 AM »
Quote from: Steven97i1 on June 01, 2024, 04:02:30 AM
Every Damos or mappack says after importing Adress 00000
So sadly i cant just pin point some of the maps

You're not supposed to import a random non matching damos into your binary. Instead you should use compare mode...

At this point you're having issues with basic computer / OLS knowledge.
You're gonna have to get through that if you want to get anywhere with this. Nobody is going to hold your hand.

If it's too difficult then pay someone for a file.
« Last Edit: June 01, 2024, 10:47:57 AM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
gremlin
Hero Member
*****

Karma: +205/-10
Offline Offline

Posts: 702
« Reply #10 on: June 01, 2024, 10:21:33 PM »
If this file doesn't help, then nothing will help you ... 
Logged
Steven97i1
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 94
« Reply #11 on: June 02, 2024, 01:42:56 PM »
Quote from: prj on June 01, 2024, 10:43:16 AM
You're not supposed to import a random non matching damos into your binary. Instead you should use compare mode...

At this point you're having issues with basic computer / OLS knowledge.
You're gonna have to get through that if you want to get anywhere with this. Nobody is going to hold your hand.

If it's too difficult then pay someone for a file.

Yes exactly, normaly i just search the net for DAmos or mappack, Winols or Tunerpro idc.
import and go.

Never used Winols besides changing 1 bit to disable EGR or something with right adress or right Column knowlegde!

but thank you very much for the help, i will now get onto searching for maps with my file and the right mappack as comparision!

thankyou very much!
Logged
Searching for All XDF for an Free XDF database ONLY for nefariousmotorsports.com
Steven97i1
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 94
« Reply #12 on: June 02, 2024, 01:45:23 PM »
Quote from: gremlin on June 01, 2024, 10:21:33 PM
If this file doesn't help, then nothing will help you ... 



This file helped me quite alot!
Thank you!
Logged
Searching for All XDF for an Free XDF database ONLY for nefariousmotorsports.com
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • February 18, 2025, 04:05:46 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 19 queries. (Pretty URLs adds 0s, 0q)