Pages: [1]
Author Topic: Coding transmission ECU ME7.5  (Read 1292 times)
SamoZlo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: June 01, 2024, 09:51:46 AM »

Hi!  I use Google translate. Sorry  Kiss
I have an ECU me7.5 for Audi TT AUQ, automatic transmission.
My car has a manual transmission. Audi a3 8L
I can't change the ECU coding.  Encoding 11570. Changed 7 to 0. No errors occurred. Unfortunately the encoding has not changed.
There is no information about manual transmission in the flash? The ECU does not see which gear is in use (used to view me7logger).

Please, I beg.
Share the crossflash with manual transmission for my software.

ECU 0261 207 775
Software 1037 36 6366
Type ME7.5

Thank you !
Logged
Spen Holder
Jr. Member
**

Karma: +2/-6
Offline Offline

Posts: 33


« Reply #1 on: June 01, 2024, 10:20:22 AM »

just flash a manual fine and done, nothing more
Logged
Audiquattro44
Full Member
***

Karma: +19/-12
Offline Offline

Posts: 94


« Reply #2 on: June 01, 2024, 12:44:30 PM »

Test this
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 653


« Reply #3 on: June 01, 2024, 11:07:08 PM »

Test this
Stupid advice.
Don't try this.
This file is for a 225 HP engine. It has a different turbine, injectors and should have an EGT sensor.

The file with MT support in attachment is the closest to your ecu for cross-firmware.


« Last Edit: June 01, 2024, 11:35:24 PM by gremlin » Logged
SamoZlo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #4 on: June 05, 2024, 02:23:33 AM »

Stupid advice.
Don't try this.
This file is for a 225 HP engine. It has a different turbine, injectors and should have an EGT sensor.

The file with MT support in attachment is the closest to your ecu for cross-firmware.




Thank you ! It worked.
It was scary to record flash Cheesy
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)