Help with ME2.8

Pages: [1]

« previous next »

Author

Topic: Help with ME2.8 (Read 1197 times)

a7x6kse6

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Help with ME2.8 « on: July 04, 2024, 04:21:11 PM »

I am new to all this but trying to learn. I have a Bosch ME2.8 that I am trying to read the MPC file and disassemble. I was able to get the MPC file using a KTAG but if I open the file in a hex editor its suspiciously empty. My goal is to use the code to find maps for tuning and eventually add some features to the ECU. Anyone have experience with these ECUs that could help me get started on learning how to do this?


	Logged

a7x6kse6

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Re: Help with ME2.8 « Reply #1 on: July 04, 2024, 05:35:33 PM »

Attached is the MPC file I got from my ECU. I have tried with 3 other ME2.8 ECUs from similar cars and I got the same MPC from all of them. I am not sure if my ktag is actually getting me the proper mpc file.


	Logged

Myrsta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Help with ME2.8 « Reply #2 on: July 28, 2024, 04:15:43 PM »

I can lock at the file tomorow


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 11:05:45 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search