Logging issues Code -8 already did slow0x00 bin Patch an 38400 baudrate

Pages: [1]

« previous next »

Author

Topic: Logging issues Code -8 already did slow0x00 bin Patch an 38400 baudrate (Read 5935 times)

RavenT

Newbie

Karma: +0/-0
Offline

Offline

Posts: 9

	Logging issues Code -8 already did slow0x00 bin Patch an 38400 baudrate « on: August 20, 2024, 03:22:10 AM »

Hey ppl,

I have an issue logging with ME7logger.

The Car is converted from 512kb ME7.5 to 1MB ME7.5 ECU (S3 APY pre Facelift).

I already did the Patch in the bin File and changed to slow0x00 and 38400 baudrate.

I even can't connect stable with only ignition on. It is logging for some Seconds then give me Timeout with Error -8.

If Dash fuse ist pulled it works fine.

I See some doing Wire Work and switching the K Line to Bypass the Cluster.

As this is a customer Car and i am Sure to get this Problem again in other Cars, i am wondering If there could be an other solution / easy removeable etc. Or Bypass the Cluster as a Software solution. I need the Cluster working while logging so without the fuse is no Option.

Perhaps someone can Help.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1601

	Re: Logging issues Code -8 already did slow0x00 bin Patch an 38400 baudrate « Reply #1 on: August 21, 2024, 01:40:24 AM »

By patch in the bin file you mean the 3 changes to start the logger when car is running and dash is present?

Code:

[Communication]
Connect      = SLOW-0x00	; Possible values: SLOW-0x11, FAST-0x10
DoubleDelay  = 12
Communicate  = HM0          ; Possible values: HM0, HM2-0x10
LogSpeed     = 56000 ;38400        ; Possible values: 10400, 14400, 19200, 38400, 56000, 57600, 125000

Try this


	Logged

RavenT

Newbie

Karma: +0/-0
Offline

Offline

Posts: 9

	Re: Logging issues Code -8 already did slow0x00 bin Patch an 38400 baudrate « Reply #2 on: August 27, 2024, 11:09:27 AM »

Yes this 3 Changes.

I already did slow0x00 and 38400 baudrate Like in your picture.


	Logged

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: Logging issues Code -8 already did slow0x00 bin Patch an 38400 baudrate « Reply #3 on: August 27, 2024, 04:36:33 PM »

There is an trick in this case.
Open nefmoto flasher, start the engine, connect do ECU, then disconnect. Right after this start me7logger.


	Logged

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: Logging issues Code -8 already did slow0x00 bin Patch an 38400 baudrate « Reply #4 on: August 28, 2024, 02:10:52 AM »

Quote from: dal on August 27, 2024, 04:36:33 PM

There is an trick in this case.
Open nefmoto flasher, start the engine, connect do ECU, then disconnect. Right after this start me7logger.

That just does the same double slow init as ME7Logger can do directly.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 12:22:18 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search