Pages: [1]
Author Topic: Aum ECU Can I flash a BAM map?  (Read 511 times)
slimwadey
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 76


« on: August 26, 2024, 04:24:52 PM »

Hi.
My son originally planned to fit an AUM engine to his car, he bought the engine and ECU .
Part number 06A 906 032 HJ
Then the aum engine turned out to be junk and he bought a BAM engine with K04.
Can I flash the BAM stock factory map to the AUM ECU or are the 2 files not compatible?
ECU is already immo off .

Thanks for you help
Steve
Logged
MirXas
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 79



« Reply #1 on: August 27, 2024, 01:39:36 PM »

Yes you can. Just don't know if the EGT sensor will work (if the hardware it there for it), need someone else to clarify on this.
Logged
prj
Hero Member
*****

Karma: +1067/-476
Offline Offline

Posts: 6004


« Reply #2 on: August 28, 2024, 02:00:54 AM »

Yes you can. Just don't know if the EGT sensor will work (if the hardware it there for it), need someone else to clarify on this.
It will, there are no physical differences between the ECU's.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
slimwadey
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 76


« Reply #3 on: August 28, 2024, 02:25:19 AM »

Perfect
Thanks for the info
I'll get on it
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)