Frenchfries
Newbie
Karma: +0/-0
 Offline
Posts: 15
|
 |
« on: October 07, 2024, 01:16:23 AM »
|
|
|
Hello everybodies,
I tried to find any topics about this subject, but I'm not sure that it's possible.
I bought a car with ECU problem, and now i'm trying to transfert immo to another ECU.
I bought some tools, token and no way, nothing works.
I would like to know if somebodiers have an ideas to so.
I did:
- ODIS online. Not possible anymore (need DSS)
- Weboctopus. No results
- Manually. Seems to be crypted or I don't know.
Many thanks for your advice.
SW 5G0906259.
|
|
|
|
|
Logged
|
|
|
|
|
IamwhoIam
|
|
« Reply #1 on: October 07, 2024, 02:55:05 AM »
|
|
|
I can do this for you if you have a complete backup of the original ECU and of the new ECU.
|
|
|
|
|
Logged
|
I have no logs because I have a boost gauge (makes things easier)
|
|
|
EanDem
Full Member
Karma: +8/-40
 Online
Posts: 78
|
|
« Reply #2 on: October 07, 2024, 03:27:56 AM »
|
|
|
Hello everybodies,
I tried to find any topics about this subject, but I'm not sure that it's possible.
I bought a car with ECU problem, and now i'm trying to transfert immo to another ECU.
I bought some tools, token and no way, nothing works.
I would like to know if somebodiers have an ideas to so.
I did:
- ODIS online. Not possible anymore (need DSS)
- Weboctopus. No results
- Manually. Seems to be crypted or I don't know.
Many thanks for your advice.
SW 5G0906259.
Transfer will not work by HSE. But disabling immo possible via same vendor you mentioned. There quite few suppliers online for that actually. |
|
|
|
|
Logged
|
|
|
|
Frenchfries
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #3 on: October 07, 2024, 07:25:14 AM »
|
|
|
OK many thanks for your answer. I thought like you but not working too.
Maybe wrong files or I'm not able to use the tool correctly. I tried several times.
|
|
|
|
|
Logged
|
|
|
|
Frenchfries
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #4 on: October 07, 2024, 07:30:28 AM »
|
|
|
I can do this for you if you have a complete backup of the original ECU and of the new ECU.
Thanks to tell me if this dump is correct. My first thiniking was a wrong dump, but I opened it, and for me seems good. Attached, it comes from my ECU damaged. |
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #5 on: October 07, 2024, 08:26:47 AM »
|
|
|
https://tools.vehical.net/s18immoOnline instant solution for disabling the immo, if you decide to go that way. You will need to write the ECU in boot, as OBD is not possible when immo is not authenticated.
|
|
|
|
|
Logged
|
|
|
|
EanDem
Full Member
Karma: +8/-40
Online
Posts: 78
|
|
« Reply #6 on: October 07, 2024, 08:32:25 AM »
|
|
|
Thanks to tell me if this dump is correct. My first thiniking was a wrong dump, but I opened it, and for me seems good.
Attached, it comes from my ECU damaged.
To disable immo in replacement ecu you must have full read of it. Do you have it? |
|
|
|
|
Logged
|
|
|
|
Frenchfries
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #7 on: October 07, 2024, 09:13:50 AM »
|
|
|
To disable immo in replacement ecu you must have full read of it. Do you have it?
Yes, Of course, I have full read from both ECU. I don't know if it's correct. So I posted the original one in order to tell if boot read was ok. Thanks so much |
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #8 on: October 07, 2024, 11:08:57 AM »
|
|
|
If you want to kill immo rather than pair it:
1. Kill immo in new ECU.
2. Put the ECU in the car and flash FRF of correct software version. It will let you flash because immo is off. Alternatively you can flash directly using OBD protocol on the bench by disconnecting the boot pin, because with immo off the ECU is happy to do that.
3. Read the new ECU again.
4. Kill immo in new ECU again.
5. Put the ECU in the car - now you have correct software version and immo is off...
Old ECU is not important at all, you don't need read from it either, if you want to go the kill immo route.
|
|
|
|
|
Logged
|
|
|
|
Frenchfries
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #9 on: October 07, 2024, 11:46:09 AM »
|
|
|
If you want to kill immo rather than pair it:
1. Kill immo in new ECU.
2. Put the ECU in the car and flash FRF of correct software version. It will let you flash because immo is off. Alternatively you can flash directly using OBD protocol on the bench by disconnecting the boot pin, because with immo off the ECU is happy to do that.
3. Read the new ECU again.
4. Kill immo in new ECU again.
5. Put the ECU in the car - now you have correct software version and immo is off...
Old ECU is not important at all, you don't need read from it either, if you want to go the kill immo route.
Oh yeah. it's exactly what I thought but like I'm an lucky guy. It's not so easy. So, I use the website you mentionned. I kill the immo in the new ECU. I put in the car. I saw that Trouble code regarding the lock by immo dispapear in ECU (cool). But dash still have SAFE due to mismatch. Anyway, I use ODIS-E to flash the good SW (FRF). Negative answer due to immo mismatch. So, now, I'm little bored. Thanks. |
|
|
|
|
Logged
|
|
|
|
Frenchfries
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #10 on: October 07, 2024, 12:21:42 PM »
|
|
|
Hi again,
I did some others tests. It seems that the immo Off which I flashed is not correct.
I tried without dash, it's the ECU himslef which send immo status nok.
So, no flash possible...
|
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #11 on: October 07, 2024, 12:40:18 PM »
|
|
|
Oh yeah. it's exactly what I thought but like I'm an lucky guy. It's not so easy.
So, I use the website you mentionned. You did not use the website I mentioned. No idea what you used. So the rest of your post seems like BS as well. What is your motivation behind lying? |
|
|
|
|
Logged
|
|
|
|
Frenchfries
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #12 on: October 07, 2024, 12:52:28 PM »
|
|
|
I'm sorry but I don't understand.
I used exactly tools from website like you mentionned.
I'm sorry if I wrote a mistake regarding what I did.
In fact I didn't use excatly your shortcut because I had already paid in other website.
My mistake was to put complete file (eeprom and int_flash). so with just flash, it was ok to have a correct feedback.
I flashed it and it seems that it's not ok.
Sorry, if you're a thinking that I'm luing. It was not my goal.
Thanks again for your support
|
|
|
|
|
Logged
|
|
|
|
Frenchfries
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #13 on: October 07, 2024, 12:57:27 PM »
|
|
|
You did not use the website I mentioned. No idea what you used.
So the rest of your post seems like BS as well. What is your motivation behind lying?
I guess you are 100% sure that I have to use this website. So I will sign in. Do you know if it's possible to check the quality of immo off with both flash? Probably to complex. Thanks again. |
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #14 on: October 07, 2024, 02:15:16 PM »
|
|
|
I'm sorry but I don't understand.
I used exactly tools from website like you mentionned.
I'm sorry if I wrote a mistake regarding what I did.
In fact I didn't use excatly your shortcut because I had already paid in other website.
My mistake was to put complete file (eeprom and int_flash). so with just flash, it was ok to have a correct feedback.
I flashed it and it seems that it's not ok.
Sorry, if you're a thinking that I'm luing. It was not my goal.
Thanks again for your support Are you high or something? I gave you link to working solution. You used something else or IDK what you did, and then said that the link does not work. WTF? |
|
|
|
|
Logged
|
|
|
|
|
