Pages: [1]
Author Topic: Audi a3 r32 me7.1.1 VVT adjust  (Read 194 times)
golf110
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: November 11, 2024, 10:20:55 AM »

Hello, can someone help with setting the VVT on P32 me7.1.1 audi a3. I set up these maps but to no avail. I want to tune an intake camshaft.
KFNWWUE, DWNWABGE, KFDWNWSUE, KFNWKHE, KFNWKHKE, KFNWKHLLE, KFNWKHLLKE, KFNWKRE, KFNWLLE,
KFNWSE, KFNWWLE, KFNWWLLE, WNWSMXE, WNWSTE, WNWSWOFE and WNWREO.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2799



« Reply #1 on: November 12, 2024, 01:35:06 AM »

Do you have a dyno?
Logged

Giving your mom a tuneup
golf110
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: November 12, 2024, 03:29:30 AM »

Yes, I have a dyno, but camshaft actual position is not  like in map in software.
Logged
prj
Hero Member
*****

Karma: +1069/-476
Offline Offline

Posts: 6011


« Reply #3 on: November 12, 2024, 10:06:35 AM »

3 Options:

a) Use a proper logger instead of VCDS and you will see everything like it is in the software.
b) Create own measuring blocks for VCDS.
c) Dig into the FR and figure out how to back calculate what you need.

Each one of them will solve the issue.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)