Pages: [1]
Author Topic: audi a4 1.8T 8D0907557N original file request  (Read 9055 times)
chemixer
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« on: July 30, 2012, 08:35:02 AM »

Have anybody original file for this ECU 8D0907557N? car a4 b5 1.8T USA model
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #1 on: July 31, 2012, 05:50:05 AM »

what ecu me5.9 or 3.8  Huh what for a chip is inside . you can use the file from a german car all the same
Logged
chemixer
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #2 on: August 01, 2012, 11:02:43 PM »

ecu should be m5.9. European car has one O2 sensor, this one has 2. or it is nor a problem? I will post sw after weekend.
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #3 on: August 01, 2012, 11:13:54 PM »

two O2 are you sure Huh but this is no Problem i think . test it
Logged
chemixer
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #4 on: August 02, 2012, 10:44:44 PM »

I am sure, because I have changed them both few months ago. Cheesy  Also there I can find bin for this ecu? I can not find it in original files section.
« Last Edit: August 02, 2012, 10:46:33 PM by chemixer » Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #5 on: August 03, 2012, 01:46:48 AM »

have you a tuning file from this ecu ?? if you have send it to me and i make it original
Logged
chemixer
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #6 on: August 03, 2012, 02:14:06 AM »

no, I donĀ“t, for this I am trying to read ecu. it is not chiped.
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #7 on: August 03, 2012, 03:04:48 AM »

you can only read when you desolder the 29f200.
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Online Online

Posts: 654


« Reply #8 on: August 04, 2012, 02:57:00 AM »

Also there I can find bin for this ecu? I can not find it in original files section.

You can use files from
8D0907558M or 8D0907559
as original for 557N
557N has problems in operation and was replaced by manufacturer with above versions.
Logged
chemixer
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #9 on: August 05, 2012, 10:48:40 PM »

thanks for answers. Also I forgot to write sw 0 261 204 179, hw (i think) 26sa4908
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.034 seconds with 17 queries. (Pretty URLs adds 0.009s, 0q)