Pages: [1]
Author Topic: Injector map locations 4b0906018P  (Read 476 times)
rzyao
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 45


« on: December 21, 2024, 04:37:35 PM »

Looking for the following maps in my file as I swapped injectors and realized my XDF didn't have everything I needed. 2000 Audi A4 1.8t ATW

KVB - consumption constant
TVUB - injector offset
TEMIN - minimum injector pulse

I'd also like to learn how to find maps on my own instead of always having to ask, the tools I could find (maplocator-ui and me7romtool) didn't seem to have the maps I needed
Logged
gremlin
Hero Member
*****

Karma: +201/-9
Offline Offline

Posts: 679


« Reply #1 on: December 22, 2024, 08:47:58 AM »

KVB - 0x1A256
TVUB - 0x11DF2
TEMIN - 0x11CC6
TEMINVA - 0x11CC8


I'd also like to learn how to find maps on my own instead of always having to ask, the tools I could find (maplocator-ui and me7romtool) didn't seem to have the maps I needed

There are no universal tools  . But it's very easy.
Just 10-15 years of experience and you will not have any  difficulty to find maps locations.
Logged
rzyao
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 45


« Reply #2 on: December 22, 2024, 10:51:50 AM »

Thank you!

Could you also let me know the factors for each map, and the axis locations? My TVUB looks like it should have a factor of 0.0032 following the .ecu file from VisualME7Logger, but it appears in the wrong direction if I put in that address (highest number furthest to the right), and the values don't make much sense (ranging between 4 and 6 ms). I also can't get the axis labels to line up with anything meaningful anywhere close to the 0x11DF2, I tried offsetting it similarly to how it is in an M box file since I can't find a TVUB that makes sense anywhere else

0x11DDC seems to have much more reasonable values, and the axis follows 8-10-12-14-16, could this possibly be correct?

There are no universal tools  . But it's very easy.
Just 10-15 years of experience and you will not have any  difficulty to find maps locations.

Do you have any pointers on where to start? I'm taking a course on assembly and stuff like that currently which I understand helps with finding maps in combination with the FR
« Last Edit: December 22, 2024, 01:54:05 PM by rzyao » Logged
rzyao
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 45


« Reply #3 on: December 22, 2024, 12:02:06 PM »

Also, that location for KVB doesn't make sense to me, in my bin it's just 00, do I have something set up wrong?
Logged
gremlin
Hero Member
*****

Karma: +201/-9
Offline Offline

Posts: 679


« Reply #4 on: December 22, 2024, 08:56:46 PM »

Also, that location for KVB doesn't make sense to me, in my bin it's just 00, do I have something set up wrong?

The above locations correspond to firmware version ..018P_0008_352802
Your version is ..018P_0006_352750. The map locations are shown in the picture.
KVB (8-bit) factor=3,046875
Other maps are 16-bit factor = 0,0032
Version 0008 is update for version 0006.
« Last Edit: December 22, 2024, 09:09:02 PM by gremlin » Logged
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 245


« Reply #5 on: December 23, 2024, 05:25:11 AM »

Atw is narrow band? Block 058? Me7.1 or me7.5?
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
gremlin
Hero Member
*****

Karma: +201/-9
Offline Offline

Posts: 679


« Reply #6 on: December 23, 2024, 09:24:07 AM »

Atw is narrow band? Block 058? Me7.1 or me7.5?

ATW is ME7.5 NB
Logged
gremlin
Hero Member
*****

Karma: +201/-9
Offline Offline

Posts: 679


« Reply #7 on: December 23, 2024, 09:25:41 AM »

Atw is narrow band? Block 058? Me7.1 or me7.5?

ATW is ME7.5 NB
Logged
rzyao
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 45


« Reply #8 on: December 23, 2024, 09:42:03 AM »

Atw is narrow band? Block 058? Me7.1 or me7.5?

Yeah, 058 block with the small port head from the AWM in the later A4s/Passats

ATW is ME7.5 NB

I never knew if it was ME7.1 or ME7.5, what's the difference? I always thought ME7.5 meant it had a wideband like later 1.8Ts and ME7.1 had a narrowband like the B5 S4, but I thought it weird that ESKONF is setup as ME7.5 (referencing S4Wiki)
Logged
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 245


« Reply #9 on: December 23, 2024, 12:10:12 PM »

from what I have just read it has the AEB bottom so I imagine 20mm axles and small AWM head without vvt but still DBW. Maybe you can update to AWT like mine wideband and vvt. I too thought narrow band me7.1
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
gremlin
Hero Member
*****

Karma: +201/-9
Offline Offline

Posts: 679


« Reply #10 on: December 23, 2024, 01:36:03 PM »

Knowledge is not the same as guesswork.
As an example, the serien variants  of the ECU me7.5 for the period MY 1998...2001.
Two branches are clearly visible - with LSF(narrow band)  and with LSU (wide band).
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)