ECU:       8E0 909 518 AS
VERSION:    0003
ECU NUMBER:   0 261 208 500
SOFTWARE:    369011

Hi there, someone could confirm and answer a few things please ?

ZKLAMFAW "Time constant filtering of enrichment by driver request"
adress : 0x26EC0 16bit LoHi

Working on an xdf and once I define this adress in Tunerpro I get a table value of 43818 not "13107" like in the  below post.
( i know it should have a conversion factor here to get the proper value)
http://nefariousmotorsports.com/forum/index.php?topic=2637.0

Here is the stuff I dont get. According to this topic
(the one and only that had a proper discussion regards to ZKLAMFAW )

In winols ZKLAMFAW at adress 826EC0 table value = 0.3000 (/s)

If I do the same math that s5fourdoor have did 43818*0.00015259021 = 6.69 ( not even close to 0.3000 lol )

to get 0.3000 out of 43818 conversion factor suppose to be ( in my case )

0.3/43818 = 0.0000068465 therefore

43818*0.0000068465 = 0.299999937 " 0.3000"

I have an impression that something is off here, but not sure what.

If someone could point me to the right direction it would be lovely. Im not expecting to be spoon fed, im happy to read, calculate fight for the result, but I lost here.

Added picture and my ori.bin