I have been playing with this idea that   with ME7.5   the ecu can pick up on what gear you are in and vehicle speed
 is it not possible to Simulate 2 step?   if you set up  a file that will give you a soft/ or hard cut limiter   say 3,500 rpm   you would also set so that when your in neutral with foot on brake or even with E brake pulled up   you would be able to rev and bang off the limiter to thus create 2 step    without needing any external rev limiters ( 2 step wired up box)

 i had dabbled around with chat GPT  to give an idea at what offset and at what limiters   you would have to address to be able to code the ecu in this way   my current tuner has little knowledge of Autos in this area    i personally don't own Winols to try and mess around with my spare ecu    this is purely for fun and for possible run at a 2 step comp  if this could even be done    i know i may get some hate for the post but i love to learn and would like to understand why or why not this could work       

1.8t 06A  01 passat running 4B0906018 CM/CL ecu    chat GPTs ecu file  would brick the ecu and i would fix via bootmode  with ME7check and sum  was told uncorrectable error in startaddor/endaddor portion at the end of the check    not really surprised it didnt work lol      hoping to have a good discussion thanks!

there are truth in your words but the concept of the idea is still out there and  i was able to check out some of the parameters that it said i should take a look at   I used the Winols5 test verison  to find thew addresses in the bin file that it had mentioned  and  those were true and not hard to find but like i said  i have no access to save and export a file    i could try and post the screen recording i did of the repsonse   or how about bouncing ideas off you?

its literally just using the data and software of the ecu  to pretty much set a limiter in a specific scenario for the ecu  to  limit rpms and increase fuel+spark  for the exact action of depressing the clutch pedal   and all of the other stuff that is coded in for the effect    i didnt say or think it was going to be easy      thats why i need someone with knowledge of winols and tuning to help me on my journey

So take a current 2 step code/bin file from here and do the changes?   Well unfortunately  I dont really know how to do that.....  I can barely edit an acutal file and  online all the "free" versions of winols are sketchy.    Would you be willing to help me out. If you have the time?     I can of course pay for services....  I just  havent found anyone who can help me. Do what I want to do. And you seem to be getting my understanding.      

 im asking here bc honestly.  Public code is Chinese to me. Im assuming thats a public. Manual 2 step  that someone has given to the community. But I fail to understand how to implicate it

I appreciate it!!  Thanks, you very much    i will add my current running tuned file from my tuner hopefully it is not protected in any way but we shall sort that out as well   and very nice on the program to automate that     you have quite a few programs that are great!

also while we are here   am i able to get a regular 2 step file and a aggressive one so to speak...  im not looking to break the motor or anything but it would be nice to try out   i take all the risk in asking these so thanks again!

im currently in the middle of a sudden tear down for timing as my T belt tried to shred itself   just after i re did the head gasket and various other things!  looking forward to try the new Map/File