Pages: [1]
Author Topic: KFRLATR -- what use would it have..???  (Read 3807 times)
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« on: August 13, 2012, 09:34:58 AM »

Minimum load for exhaust temperature control KFRLATR

Its a 5*5 map. RPM v 100%

Its in relation to CATR and EGT control..

Files I've looked at it's all 0 but assume you can put in the minimum load for the activation of EGT protection.

Thus if you wanted EGT protection to only be active over say a load of 191 then you would set 191 at the relevant points.

Any idea why this table is there, what purpose it would be used I understand it's function just not its application? answers on a postcard.

Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: August 14, 2012, 11:35:40 AM »

Have you searched the FR for it? I'll dig around time permitting.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #2 on: August 14, 2012, 03:47:08 PM »

Yes , I was reading up on CATR and saw a list of related maps including this one, there wasn't much info on it and considering my stock BAM was 0 across the table I just wondered if it actually had a practical use to tunning and if it didn't why it was a map at all.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.002s, 0q)