I have a Golf 4 1.8T AUM with a Stage 1 tune. I'm currently installing injectors from an Audi S3 8L BAM and integrating them into tune.
I've already transferred all the necessary maps from the BAM data:
KRKTE
TVUB
FKVA
KVB
Now I only need FKKVS. Can I copy the map, including the axles, from the BAM file, or should I recalculate the entire map using a data log?
Thanks for your help!
If your Golf uses returnless fuel system and the S3 uses a return fuel system, the S3 KRKTE is not right for your use. You need to recalculate KRKTE to account for the higher fuel volume delivered at base 4 bar fuel pressure over the S3 base 3 bar FP. Settings elsewhere in the golf .bin account for constant 4bar fuel pressure rather than rising rate that return system uses.
