Pages: [1]
Author Topic: 8L0906018M SAI and N249 dele  (Read 266 times)
Shiro
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« on: March 25, 2026, 07:35:15 AM »

Hey, I'd like to remove the SAI and N249 from my Audi TT 8N 1.8T APX. I want to keep the Evap. Could anyone help me with this? Thanks for any help  Grin

Here is my ori file:
Bosch Hardware Number: 0261206797
Bosch Software Number: 1037354094
Vw Software Number: 8L0906018M  0002
Logged
JeanAwt
Sr. Member
****

Karma: +18/-15
Offline Offline

Posts: 338


« Reply #1 on: Yesterday at 10:45:10 PM »

It's all in the wiki... why do you want to remove n249? To get boost spikes after releasing the pedal and no anticipation for the DV opening... study the system, test it with and without it...
Logged

A4 B5 1.8T ONLY
Shiro
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #2 on: Today at 01:20:11 AM »

I bought this car without n249... if it weren't for that, I wouldn't touch it  Undecided If I had a map pack, I could handle it myself, I know it's described on the wiki, thank you for your reply  Wink
Logged
Shiro
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #3 on: Today at 02:11:06 AM »

I found .kp and did sai and n249 off, could someone check if I did it right?
Logged
JeanAwt
Sr. Member
****

Karma: +18/-15
Offline Offline

Posts: 338


« Reply #4 on: Today at 04:52:35 AM »

Yes, that's good.
eskonf 14F10
FF FF 00 C0 FF FB FF
mslub 0
mslbas 0

don't forget checksum
Logged

A4 B5 1.8T ONLY
Shiro
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #5 on: Today at 06:07:12 AM »

Thank you very much  Cheesy
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 14 queries. (Pretty URLs adds 0s, 0q)