Me7. 1.1 bench flash with Immo on

Pages: [1]

« previous next »

Author

Topic: Me7. 1.1 bench flash with Immo on (Read 537 times)

Rick81

Full Member

Karma: +0/-13
Offline

Offline

Posts: 150

	Me7. 1.1 bench flash with Immo on « on: June 06, 2026, 05:49:03 PM »

Can the Audi 2.7T be bench flashed with the Immo still on?

The reason I'm asking is the other week I used nefmoto ecu flasher to flash a manual bin file to my car and it worked once drives fine but after that I can read the bin but can't flash it. Huh

If it can be bench flashed with the Immob on what are the pin outs for flashing is it a different set up to the s4 ecu set up or the same


	Logged

_nameless

Hero Member

Karma: +373/-3440
Offline

Offline

Posts: 3005

	Re: Me7. 1.1 bench flash with Immo on « Reply #1 on: June 06, 2026, 06:36:29 PM »

add power to pin 121 as well. Ive had problems in the past and adding power to pin 121 will fix the issue. The code you would normally get are conditions not met


	Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.

Rick81

Full Member

Karma: +0/-13
Offline

Offline

Posts: 150

	Re: Me7. 1.1 bench flash with Immo on « Reply #2 on: June 06, 2026, 11:47:35 PM »

Hi

What software would you use for bench flashing with?


« Last Edit: June 07, 2026, 11:49:30 AM by Rick81 »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

June 10, 2026, 11:24:05 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search