Read and Write Eeprom on OBD2 Me7.5

Pages: [1]

« previous next »

Author

Topic: Read and Write Eeprom on OBD2 Me7.5 (Read 829 times)

Kacpern

Jr. Member

Karma: +0/-9
Offline

Offline

Posts: 44

	Read and Write Eeprom on OBD2 Me7.5 « on: June 17, 2026, 12:57:48 AM »

Hello, what can read and write EEPROM via OBD2 in ME7.5? It's read using a standard KKL cable. But is there a cable that can write it via OBD?


	Logged

BlackT

Hero Member

Karma: +82/-48
Offline

Offline

Posts: 1535

	Re: Read and Write Eeprom on OBD2 Me7.5 « Reply #1 on: June 17, 2026, 06:02:43 PM »

Vag dash CAN


	Logged

royce5950

Sr. Member

Karma: +18/-57
Offline

Offline

Posts: 388

	Re: Read and Write Eeprom on OBD2 Me7.5 « Reply #2 on: Today at 12:50:07 AM »

Solder a tiny thin short piece of wire attached to the boot pad on ME7.5 and make it so that the wire runs straight out the side of the casing no more than 1/16” and that way in the future if you ever have to do anything boot mode related you don’t need to remove and open up the module you can just connect in boot mode by shorting the tip of that wire you put on there and now your set for the long haul


	Logged

Tuned Files Ready To Be Flashed ⚡ For Audi / VW 1.8T & 2.0T Engines ➡️ TUNEDBYV3@GMAIL.COM ✨ Send Me An Email Now And Score Any File For Under $100

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

June 25, 2026, 04:51:48 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search