Pages: [1]
Author Topic: Original file request — 06A906032FQ (ME7.5, Dst07o/040501) — corrupted flash, n  (Read 968 times)
be539ast
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2



Looking for a verified-good stock dump matching this exact software ID, pulled from a healthy ECU:
VW Part #: 06A906032FQ
Bosch Hardware #: 0261207366
Software ID: 42/1/ME7.5/120/4220.AA//23F/Dst07o/040501
Vehicle: 2002 Golf Mk4, 2.0L 8v (AZG/APK/AQY family)
My own ECU has a corrupted flash region — about 367KB blank (0xFF) starting at offset 0xA4212, confirmed consistent across re-reads with NefMoto. Bootloader responds fine, just throws P0601 and won't run. Looking for a clean reference file with the same exact software ID above (not just same part number) so I can write it back and confirm the offset matches my application code's checksum expectations.
Happy to share my corrupted dump for comparison if it helps anyone verify a match. Thanks in advance.
Logged
ecuprog7
Full Member
***

Karma: +10/-8
Offline Offline

Posts: 84



from forum search:
http://nefariousmotorsports.com/forum/index.php?topic=9147.0
Logged
be539ast
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2



Hey, thanks for sharing but I think you accidentally sent the EEPROM dump instead of the flash binary. The file you sent is only 512 bytes — I need the full 1MB flash image (should be exactly 1,048,576 bytes). In NefMoto it's the main flash read, not the EEPROM Cheers. Grin
Logged
ecuprog7
Full Member
***

Karma: +10/-8
Offline Offline

Posts: 84



my fault, maybe this one:
http://nefariousmotorsports.com/forum/index.php?topic=9153.msg81115#msg81115
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.01 seconds with 13 queries. (Pretty URLs adds 0.001s, 0q)